vijay

it controls the idle (base). It's at the back of then engine near the battery. You'll see a thick rubber 90 degree bent pipe. Remove the end and spray carb cleaner down it (after you've done the throttle bodies).

your gonna have to get a timing light to set that back correctly. Have you cleaned the throttle bodies (and IACV valve) and all connectors, then reset the ECU? That's what I would do and then you can adjust the idle if need be :) Vijay

Hi Steve, Did you mean you turned the CAS? if so that would change your timing, that needs to be spot on............. Vijay

what about using a pressure switch so it squirts when you hit a certain PSI? Vijay

an easy way to see if the injector is firing is to use a long screwdriver. Put the end on the injector and the handle to your ear, you should hear a ticking noise. If you have unburnt fuel, wouldn't that suggest your not getting a spark. Try the connectors first and also the CAS connector :) Vijay Vijay

what have you tried to fix it? is it always the same cylinder? Vijay

Hi, It's when unburnt fuel gets in their and ignites. Try cleaning up your PTU and coilpacks connections :) Vijay

this should help - http://s95014253.onlinehome.us/63104/13701.html Vijay

Hi Dave, Is yours a series 2 car? if so it doesn't have the temp readout. Vijay

Cheers guys, NA it is then :) Chris, if you get a TT one off Andy Z, then we can just swap them over :) Vijay

Cheers guys. This bit circled in yellow is the problem bit, I've checked on 2 tt's and it doesn't have it. Chris, is this the same as your NA? Vijay

it's defo not a US shroud, the cars a UK and the shroud is either jap or UK......................................... Vijay

Hi, Does anyone know if there are different ones? got a new one to go on and it's different, have I been given the wrong one? Vijay

Hi, If anyone wants one, can you put your name down here. Cheers Vijay

cheers guys. Does anyone know any good sites on paint prep work? Vijay

Anyone :( Vijay

good, glad you're happy. They do look the nuts when lit up! Vijay

Hi Ammar, Give this guy a call, I bought mine from him abd he's been nothing but helpful - http://action-replay.co.uk/SatNav/NavEurUSB.htm His name is Doug and tell him I gave you his number :) Vijay

never did like ya :D but if I must here's some instructions - http://www.neuralmotion.com/forum/tech/idial_install/idial_install.htm. You'll see that you can actually take the clocks apart. I removed the old face just by cutting it in half with a knife, which gives the faces more clearance. The dials will go over the needle, it's just a tight fit (I promise, I've done a set of clocks). Also, if you want to wire them up so you can use the light dimmer switch, here's how to do that - http://www.twinturbo.net/net/viewmsg.aspx?forum=general&msg_id=644459 Any problems, let me know

Hi, Does anyone know what a bodyshop would use for filling any scratches/gouges/chips in plastics before painting. I need to get something 100% smooth. Thanks Vijay

cheers Jock, I'll pass that onto him :) Vijay

Hi, Does anyone know how hot it gets in the engine bay? I've been looking into timing belt covers and have been asked how hot it will get near them. Thanks Vijay

or get a tap and die set :) Vijay

do a quick search on "Castrol" and you'll see :) Vijay

Hi guys, Any update on this as I still can't receive emails. Vijay