vijay

PSI Kg/cm Bar 5 0.35 0.34 6 0.42 0.41 7 0.49 0.48 8 0.56 0.55 9 0.63 0.62 10 0.70 0.69 11 0.77 0.76 12 0.84 0.83 13 0.91 0.90 14 0.98 0.97 15 1.05 1.03 16 1.13 1.10 17 1.20 1.17 18 1.27 1.24 19 1.34 1.31 20 1.41 1.38 or you can download this program :) http://www.joshmadison.com/software/convert/ Vijay

that's the tension rod bush and yes it could cause the shaking :) Vijay

Sorry Tack, never read his post properly. 1. As said above are all your hot water taps the same? 2. If you have no flow out of the taps, that won't be you boiler. You have a blockage somewhere. Vijay

Hi Chris, Do you know if it's a combi or normal conventional? Vijay

Hi Ajay, Don't bother with that, use Paul C's guide and you'll get through it - http://www.300zx.co.uk/forums/showthread.php?t=27060 Mine failed the MOT on emissions and I went in with the flow charts and it came back with a pass :) Vijay

could also be the tension rod bushes. Vijay

either remove the starter motor and put a screwdriver through the teeth or I think you can just put in 5th gear (you'll need to get that confirmed) Vijay

try cleaning all the contacts on the PTU/Connectors first :) Vijay

yep, I know the ones you mean. I posted a link up to it once but cannot for the life of me find it :( Found some info: http://www.300zx.co.uk/forums/showthread.php?t=21501&highlight=gauge http://www.twinturbo.net/net/viewmsg.aspx?forum=general&msg_id=946598 http://www.twinturbo.net/net/viewmsg.aspx?forum=general&msg_id=946815 Vijay

Hi Tom, Do you mean these - http://www.300zx.co.uk/forums/showthread.php?t=29445 Vijay

Hi Steve, I had a leak in the same place and the seal kit cured it :) Vijay

the only difference in them is the position of the fixing clip. Vijay

http://www.300zx.co.uk/forums/showthread.php?t=3952&highlight=cover http://www.300zx.co.uk/forums/showthread.php?t=11732&highlight=cover

there are 2 small water pipes down there as well as the water pump. Vijay

come live in London, they charge £40-45. I got one on the cheap last week (through a friend) and it was £35. Vijay

about 3.5 litres according to this - http://www.zhome.com/ZCMnL/PICS/autoTrannyOilChange/autoTrannyOilChange.html Vijay

http://www.gtr.co.uk/html/technical/r33.asp http://www.gtr.co.uk/html/ Vijay

yep, the AGX's can be adjusted without removing them :) Vijay

did some on the weekend, all 4 with an oil change was about 4 hours. It's not difficult just a PIA. Vijay

use a piece of wood in between the axle stand and sill. Vijay

Have you called Smithy, he's bound to know :) Vijay

Sorry mate, never got round to sorting it out :( Vijay

lol, pleasure mate, just returning the favour anyway. You did look kinda rough though - :D Vjiay

unplug the afm, should only rev to 2500 then splutter :) Vijay

Hi Cos, Did you buy it by credit card? if so you'll have insurance with them ;) Vijay