AlanZ

HI PEOPLE CAN ANYONE SHED ANY LIGHT ON THIS PLEASE.................... :D WHEN I PRESS THE CLUTCH PEDAL DOWN I GET A WHINNING NOISE, LIKE A PUPPY-DOG WHIMPERING!!?????!! :confused: :confused: I KNOW IT SOUNDS STRANGE!! :confused: AM I RIGHT IN THINKING THE CLUTCH WORKS FROM THE ENGINE PRESSURE?? IF SO, THAT IS WHERE I COULD BE GETTING BOOST/VACUMN LEAK. THANKS PEOPLE ALANZ :hyper:

have you got a number for them? cheers alan

Hi People Does Anyone Know Of A Good 300 Mechanic In Suffolk/norfolk Area?? I Think I Have A Boost/vacumm Leak And Need Someone Who Know His Stuff To Find It. Have Tried To Find It Myself, But Cannot. Cheers Guys Alanz

JUST A QUICKIE PEOPLE. IF THE TIMING IS SET 1 OR 2 DEGREES RETARDED OF THE 15 DEGREES BTDC, WILL YOU GET A LITTLE VIBE FROM THE ENGINE UNDER BOOST THROUGH THE GEARS???? I HAD A MECHANIC SET MY TIMING TO 15 DEGREES BEFORE THE 15 DEGREES BTDC!!!!!! :headvswal AND BOY DID SHE VIBRATE UNDER LOAD!! CHEERS

i get flames from my zed too. de-catted, 555 injectors, andy p. chip, free flow exhuast, hybrid tubs, intake mod, and set the timing 1 or 2 degrees retard of base. take it to the limit in revs, change up and wwwwhhhhhhoooooooosh!!!!! out they pop. I LOVE IT!!!!!

ANDY P IS YOUR MAN HE IS SPOT ON WITH ECU CHIPS. ALAN.

HEY RETRO WILL TRY IT TOMORROW, THANKS FOR THE ADVICE, BUT WHAT DOES IT RESULT IN??? ALAN

OK ANDY, WILL KEEP AN EYE ON IT, THANKS FOR YOUR HELP MATE. ALAN.

ALSO, WHEN SHE SMOKES, A LITTLE REV AND ITS GONE AND SHE CAN IDLE FOR EVER AND NO SMOKE. VERY STRANGE TO ME!!!!

OOOHHHH!!!!! THAT SOUNDS BAD? IS IT????

I Have Been Told That It Could Be The Valve Seals??? Could This Be Correct???

NO FUEL SMELL IN OIL, AND NO SMOKE ON A COLD START

NO ANDY, NOTHING OUT OF THE DIPSTICK

Hey Guys, Just Want Some Advice And Info On What Causes The Smoke From My 300???? Got Plent Of Mods Including Hybrid Tubs,intake,exhuast,andy P. Chip Etc.... She Only Smokes When The Revs Come Down From High To Around 2500rpm, Then Whoooosh, Its There, Like Slightly Black,blue Smoke. I Know Am Over Fueling, But Just Thinking The Worst!! No Smoke Under Load Or Going Thro The Gears, Just When De-accelerating??? Also No Smoke On Idle. Cheers People. Alan.

GOT THE SAME PROB WITH MY ZED, CHANGED THE STEERING WHEEL AND NOW THE HI-CAS LIGHT COMES ON AFTER 20-30 MILES OF DRIVING. HOW DO YOU CENTRE THE STEERING WHEEL? CHEERS ALAN

Your Right Mate, Have Seen Some On E-bay Today Saying 330bhp+ For A Standard Tt????

Hi People, Does Anyone Know The Correct Rw Bhp For A Standard 1991 300zx Z32 Tt? I Have Been Told It Is 280 At The Wheel, But Some People Say That It Is 280 The Flywheel, Thus Being About 220 At The Wheel. Alan

HEY PEOPLE :hyper: CAN ANY ONE ADVISE ON A GOOD SET OF 300ZX Z32 MANUAL FOOT PEADLS TO BUY? (4 PEDALS) :confused: BEEN LOOKING ON THE NET AND THERE SEEMS TO BE ALOT OF UNIVERSAL PEDALS FOR SALE :mac1: , BUT AM LOOKING FOR A GOOD FIT AND COOL FINISH ON THE PLATE. ;) THANKS :bow: ALAN :mac1:

The problem i'm getting is a bit intermittent.. When I bury my foot in the carpet, the boost rises on my aftermarket guage to 1Bar and sometime the whole car will just cut out a bit like a fuel cut type scenario.. I've also tried nailing it also from 4000Rpm thinking it might of been a det sensor problem but it will still sometimes cut out... I'm not getting det by the way but just tried this as another check... hey there i too had this problem, but with no boost jets. i've got a hks induction kit and the filter was very old and breaking up on hard throttle and and sticking to the maf sensor!!!!!!! fitted a new filter, cleaned the maf sensor and BINGO!! no problems at all. hope this helps alan