Everything posted by 300_zedx
-
Ello peeps! just arrived! Looking at a 300zx M T/T Sat so hints very welcome :D
Welcome to the club. Paul
-
Hi
Welcome, I live near Rochester. Paul
-
i need new coilpack connectors & 2 coilpacks
Glad to help,
-
i need new coilpack connectors & 2 coilpacks
Try the Club Membership and Inquiries section on the main page, forth one down. Paul
-
belgium
They make a beer called Duvel think its 8%. Paul
-
Braking capabilitys - Zed Vs Merc Vito - A Warning for all!
Overhauled the brakes on mine in the summer, front and rear calipers new seals all round, Brembo drilled and grooved front disc's and grooved rear disc's with new pads and replaced the brake fluid with dot 5.1 and the feel of the brake peddle is much better and the initial bite has also sharped up. For those who would like to improve your brakes for a small outlay and a days work, renew the brake fluid and deglaze the pads and disc's with some course emery cloth or sanding disk (do this buy hand or an orbital sander not a grinder) and then bed the disc's and pads back in, as long as no pistons are seized you should see some improvement for little cost. Paul
-
It's the 1st of December today and........
Si, For someone who say's they hate 'CHRISTMAS' you sure do like talking about it.:D oh and Merry Christmas Si.
-
winter problems!
Do you have the correct % of anti freeze in the cooling system, as you mentioned -5 degs could it have been partly frozen. Paul
-
My Z is dead
And for those people that wanted to start a winter death count for Zeds:slap::D. Glad your ok and hope you get a good pay out from the insurance. Paul
-
West Sussex
Hi Radron, looks like your loosing the plot, this thread is for October. Paul
-
Happy Birthday Topless!!!!
Happy Birthday. Paul
-
Single piece prop
May be of use to some peeps; ebay item 220311581823. Nothing to do with me. Paul
-
Funkysi
Thanks Si
-
Funkysi
Si, what size do you think the rims are on the Wolf Tech car, 17" or 18". Cheers Paul
-
PCV valves wanted asap
Glad you got it sorted. Paul
-
PCV valves wanted asap
If you need the pipes aswell your looking at around £85 all up, looking at Mr F's site. Paul
-
Rear offset
Nick, I noticed today that Andy's car had the look that your after, what's he running? Paul
-
Virginia Water Meet Sun 26th October, up for it?
Some more picture's
-
Virginia Water Meet Sun 26th October, up for it?
Great to see so many Z's at a meeting,was good to see some new face's and meet up again with some old one's, hope you all made it back home safely. Paul
-
Virginia Water Meet Sun 26th October, up for it?
See you there.
-
Virginia Water today
yep, still going.
-
19" wheels
Not a problem for you then.:D
-
19" wheels
The Cruize 135's
-
19" wheels
Just a word of warning, I ordered a set of these a couple of months ago,and the front rims fowled on the brake calipers, which are standard,I calculated that I would need a 5mm spacer for them to clear it, which I would then need longer wheel studs which I did not have the time to mess with,so I contacted them and they said to send the back for a refund which I did, the guy who's name is Doug said that no one else had reported any problems fitting them, also no refund yet. Credit card statement due on Monday so will keep you informed,also look at there feedback on ebay. Have to say they are great looking wheels though. Paul
-
Virginia Water Meet Sun 26th October, up for it?
Should be able to get to this, Paul