Everything posted by 300_zedx
-
Skydiving
:cry: that's gotta hurt :D
-
Pound up against the Dollar
Just read in the paper that the Pound is starting to rise against the Dollar and Euro, so anyone looking to buy parts from the US, if you can, hold off from buying at the moment. Paul
-
D-Day!
Good luck to all three of you. Paul
-
speeding fine advice
I don't think three points will make much difference to you insurance.
-
Pully set
Thanks for that Jimmer, seems straight forward enough. Paul
-
sorry guys but i'm off
You could of said, I've got a parcel I need delivering to Larisa. :slap: :D
-
Pully set
Just to make people aware that they only specify 90-93 non turbo and 94-96 turbo not sure if they are any changes with pulley's over the years and between N/A and turbo models. Paul
-
Pully set
Single purchase postage is $41.00, but he will do multiple purchase deals. Paul
-
Please Help!!!
Not much help really, you seemed to have all the base's covered. Paul
-
Please Help!!!
You could try in the wanted section someone may have one on a breaker. Paul
-
need help regarding part number.
If you was to post it from the UK to the states it would cost about £5.00 he will put something on for the extra agg of sending it here so no more than $15.00. Paul
-
Please Help!!!
Then it has to be stuck on the splines, so you either need a press or you could use some heat but you will have watch the rear seal if you don't have a new one. Paul
-
need help regarding part number.
you need to ask him how much it is to ship to the UK.
-
Please Help!!!
Have you unbolted it from all the link arms. This may not be necessary.
-
Please Help!!!
when I took mine off the splines had some corrosion on them, yours may have the same, try some wd40 or similar but you probably done that already. Paul
-
Pully set
Hi legrath, already asked that and it doesn't have one, but how hard would it be to transfer it from the original pulley. Paul
-
Please Help!!!
Have you undone the four 19mm bolts and the 27mm nut on the back of the hub. Paul
-
Pully set
Thanks Isacc.
-
Pully set
Seen these on ebay.com Item number: 230345806305 sorry not sure how to make a direct link, look ok and good feedback, what do people think. Paul
-
Has anyone any experience with these?
Not sure if you have looked in the traders section, but MJP have some price's for these parts. Paul
-
Steering column loose
Just looked at the breaker I have you could drill some new holes about 20 or 30mm lower, but I would try some lock tight on the nut first. Paul
-
New (better) 500zx vid
What a great sounding Z, just a word of warning, your number plate may attract the police I got warned for having mine like that.
-
oil pressure...
If you can smell oil burning you may have a leak, so you need to have a look around under the bonnet, also look under the car.
-
Under drive pulley. Why!
ok, cheers guys.
-
I'm Tempted
Seems to be a genuine car and seller, you can't ask much more from an ebay seller 100% feedback,and like he says if you think it's not as described then walk away.Any problems with the early engines would have surfaced before now. You could also get the AA or Rac to check it over. Paul