boldy

I hope this one does the trick for you Rich and gets you back on your feet :dance: :dance: :dance: :dance:

Paul IIRC nissan ones are about £120 !!! Its sods law , there was one on ebay last week and i don.t think it sold , looked nearly new as well :headvswal :headvswal I got one off a breaker on here , about £20 and there dead easy to fit but much easier if you,ve got access to a car lift .

Have a great one Peach you lucky sod , i,m 40 on sunday and all i,ll be doing is painting my fooking front room !! :cry: :cry: :cry: :cry:

I think it was a CL600 but most top range merc,s have em , took a fair bit of mods to fit them but i was stripping my lights to repair the adjusters and paint the bezels anyway , so did them all in one go :dance: I had to fit the merc bulb holder in the zed headlight , bit of cutting and grinding and hey presto !! Below are the bits robbed off the merc lights. The zed light on the right with bulb holder removed ready to glue in the merc one I repair alot of merc,s at work , perk,s of the job !! :dance: :dance:

1, Chunk 2, Craig David 3, Chris 4, Legrath 5, Miss_Z 6.Viniboy 7. Paul C 8. cybernet 9. TonyC 10. Southwestmech 11. Scrawni 12. Jason Farrow 69. ChrisC 14. Autobeast 15. Clarkey 16. BlackMagic 17. ZX MAD 18. Kirbz 19. Paul.Donovan73@ + Mrs Paul.Donovan73@ 20. Speedemon + Mrs Speedemon. 21.smithy +Mrs + Junior 22 daves_new_ZX 23. ZX-TT +1 24. Steve-300ZX 25. JonLowndes101 (I'm refereeing for fair pool strikes!) 26. Ossian 27 boldy I would,nt miss it after last year ! :duffer: :duffer: :dance: :hurl:

Welcome bud , i would reccomend Houghtons Insurance as found on this forum , i,m 39 full n/c , paid £288 fully comp, limited to 5000miles a year :bow: HTH

Best mod i,ve done , mines a daily driver so they needed doing , i could,nt see bugger all on dark roads even with the driving lamps on :headvswal Best of all they did,nt cost nowt , there out of a merc :dance: :dance:

Welcome aboard bud , hope you find a good un :dance: :dance:

Ooh i,ve always liked these , had a 3.0 senator for a few years and was looking to get another before i bought the zed !! Cracking motors :bow:

I bet her baps are bigger than yours :x: :x:

Bugatti Veyron hmmmmm , i want :bow: :bow: But why do they put wheels on that look like they,ve come off a Audi TT :headvswal :headvswal

Good colour choice :dance: :dance: Looks a nice car Rich , will you be in it for the joint meet ?

:bow: :bow: :bow: :bow:

Wrong time of the month or wot :rant: :rant: :rant:

Round em up , put em on a island and NUKE the barstewards :x: :x: It does make you wonder what its gonna be like in another 20 years when this Scum has had kids of their own and brought them up THEIR way :headvswal :headvswal

You can get Waxoil in aerosols if you,re gonna do it yourself , any bodyshop will have undersealing guns , should,nt cost too much to have it done . Might be worth while checking your car over underneath before undersealing to check on the brake and fuel lines for corrosion cos they,ll probably get covered and mask any potential problems .HTH :D

Got this on ebay from Larkspeed at leeds , a whole £40 !!!

Go to a motor factor and get a Caramel wheel , these are designed to remove double sided tape and stripes without damaging the paintwork , its a soft rubber wheel on a mandrel , put it in a drill and rub all the tape off , works a treat and only takes a minute to do. :dance: :dance:

Yes bud , iv,e got oil pressure and oil temp senders in mine and the spare hole blanked , check to make sure you,ve got senders with matching threads as the sandwich plate , i had to have my plate re-tapped . HTH :)

They are 19,s in my sig , borrowed while i got mine re-furbed , did,nt notice much difference in ride quality compared to the seventeens i use. They look the cats conkers on :dance: :dance: Gotta start saving :headvswal

What tyre pressures would you reccomend Jeff ? They are 235,s on the front and 255 on the rear all 40 proflie . Cheers

Has anybody else got AVS alloys on they seem quite common on imports , or has anybody fitted Pirelli P Zero.s on there zed ???? The reason i,m asking is after having my alloys refurbished i fitted Pirelli P Zero,s all round , i knew my tracking was out so i got it into work and did a 4 wheel alighnment , rear track was slightly out and the front alot out , camber and castor was in tolerance , sorted the tracking , job done i thought. When driving now at slow speeds my car seems to want to follow every bump and hollow in the road , the steering pulls from side to side trying to follow the undulations in the road surface , its quite alarming Would wheels with the wrong offset cause this , i don,t know the offset of these wheels i,ve got :headvswal or could it be the tyres as it pulled a bit before changing to Pirelli,s but i put that down to the tracking being out :confused: :confused: :confused: These are AVS alloys Thanks

I should be up for this Pete , but i,m up to my armpits with decorating at the mo , need to get it done its pi55ing me off now :headvswal I,ll let you now bud .

There is a bit of kit out we use in bodyshops called a ' Caramel wheel ' which is basically a soft rubber wheel on a mandrel which you put in a drill and it rubs the line and glue off without damaging the paintwork , cracking bit of kit , any good motor factor should have them . HTH

I,ve just remembered , you had a Granada that you didn,t do owt to , or did i dream that ? :confused: :confused: