Rev1Richie

yes please, just pm it to me. Thanks Rich

Well last week end we flew down to the south of France to see the Monaco GP (well Done Lewis) So i thought i'd show you some of the Pics i took, and yes that is a 250 GT Any one tell me the black sporty looking car in the last two Photo. Regards

Hi Guys, my car has been up in Tamworth having the majority of its floor and both sills welded, Now the guy who took it up there isn't available any more so i am thinking of going up there and bringing it down myself, Only trouble is i dont have a trailer. So is there anyone around the Cambridge area who has one i can borrow or knows anyone who is amenable to letting someone borrow it. Thanks Rich

Well i only just figured it out yesterday, after seeing a couple more on the road , we had the Duxford Air Show just down the road, and they usually have car groups there, so i reckon that was it. Whilst sitting in the garden and after a couple of Spitfires had flown over, i heard this almighty rumble coming and when i looked up saw this It was quite a sight, multiply by 10 and it gives you an idea what it was like in the war... Quite a weekend really.

Not to mention the 2 that were behind me, a new vantage and a '90's virage...

Whilst pulling in to a hotel car park to ask some questions , i got out to and saw these.. not bad.

Hi Buddy, its from the Mk2 MR2 a rev 3 i think, here's the assembly anyway. I always liked the ergonomics of it in the MR2, it just feels better than the "T-bar" versions Rich

I've been modifying a shifter mech to take the Auto Knob off a MR2 which when i owned a couple i really liked, i'll get some pics later and post them. Rich

Just a quick one microsoft store charge £189 for this product, a place called Software Geek charge £29.99 am i missing something all you IT pros out there. Rich

Graham, hi. Its a suspended company on the LSE, a public limited company i think (should have mentioned that) i'll do some more digging Rich

Hi Guys, im after any one who has any working knowledge of the rules regarding the above, specifically, if a member of the board, or the CEO/Chairman/Chief Exec has a substantial amount of the company's shares (5% equalling 750,000 shares) When the company goes in administration is that Board Member liable in any way to the company for those shares, in any way simples.... Rich

Guys, thanks for your help, i've managed to get gaskets the right size for each join, Thats great. Quick question now, When joining the pipework do i just rely on the gasket making a good join, or do i use something like firegum as well. Rich

Guys, thanks for your help, i've managed to get gaskets the right size for each join, Thats great. Quick question now, When joining the pipework do i just rely on the gasket making a good join, or do i use something like firegum as well. Rich

I need it for the bottom of the downpipes and then in the middle of a scorpion exhaust which is prob the "usual" shape. Not sure of size. Rich

Hi Guys, Whilst swapping around exhaust systems, i got wondering if there was an alternative to slapping on tube after tube of firegum, so does anyone have any idea where i can get exhaust gasket material to cut to shape, and one i dont have to wait 32 days for... Rich

It can happen just like that, i know, it happened to me 18 months ago, lots of chest pains one evening, thought it was indegestion, took loads of Rennie... felt like sh*t and went to bed, told 3 months later when i had an ECG "Oh.. you've had a heart attck.." Been on Betablockers since. SO a warning to all, keep healthy Hope you recover and go on to lead a long life :thumbup1:

NA power steering pump, complete with all brackets and bolts, Fluid Pot and hose. Good working order. £75 delivered Rich

You know what Richie, I've seriously been thinking exactly that, because I don't fancy doing the welding either!!! Rich

Well im now looking at air angle grinder, seems a lot easier to switch on/off, also as im working under the car , on my back with little elbow room , its light weight will help a lot.

Well, looks like they DO have DMS its a rocker switch that will run the grinder if you push it fwd and switch off when you let go, if you want constant ON, you push it past the on posn. So looks like my grinder had a faulty switch 'cos it only had the one way to "GO" Rich

After having a nasty argument with an angle grinder recently, can someone tell me if they do one with a dead mans switch rather that "full on" or Off.

Do you know what the irony is of this whole situation is, While at TTP I was a Design Engineer. Responsible for bringing 3D solid modelling and all that it encompasses into TTP 10 -15 years ago, and Designed many products in 3D for Dymo, Black and Decker, Miat to name a few. If i was still there i would do this as easy as you are Ian, and thats why i appreciate this as i know what it entails. I'll get the part to you asap. rich Thanks again.

Ian thats an offer way beyond my expectation, if you're sure.. pm me your address. Many Many Thanks... Rich

Yep its the aluminium ring ONLY i'm after, i was short of a couple of the red nuts and funky put me on to some in japan, Brill!, however i've looked through all the japan sites and this ring does not appear any where, so thats why i'm looking for an alternative method... could be fun!! Rich

Hi Guys, i need some help and advice here, i've got a set of wheels which have a circular nut cover as shown in the picture. once this is put on, a 50mm odd dia nut goes down the thread to cover the middle, giving the final appearance as shown, Now my problem is i have been looking for 2 more of these nut covers for the last 2 years with no result. So i am wondering that maybe i need to think outside the box, would it therefor be possible to make a mould using one of them in order to "cast" another 2. They have no structural use so i'm thinking why not. Only trouble is when i last did anything similar it was 35 years ago at college. So can some people give me some advice/options, I know its just 2 little pieces and the cost would probably be more than the rims are worth, so im not looking to outsource it, it needs to be something I can do, i'm no idiot and spent 20 years being a Mech design Enginer so i'm sure i could cope. One of my thoughts was using one of those new 3D printer for home use, i know i used them at work 10-15 years ago when they first came out, but that was on a industrial scale When the client would authorise thousands just for a hand held steriolyth rather than Drawings. So any body got some ideas. Rich