Terry

Just bought badges see how they look when they come. Bought black carbon background with gold writing saying bbs. There only a sticker but may stop wheel looking little plain in the centre. Won't be fitting till it's car is all painted and back together but I post pics when fitted and soon has they come I'll post up what the quality looks like. That's what Im worried about why they cheap. But then most wheels seem like there a package they have no tyres and for a half decent set most likely gonna be 5 to 6 hundred. So if bought has a package would be near a grand would have thought, with the roads round here problem look like 50pences in a wk.

Just found some bbs badges on flea bay, These are bbs replica look things theres carbon look bbs centre badges with gold writing or red ones so.... Would ya or wouldn't ya put these on the wheels.

£350 delivered eBay with fitting kit, chrome things to go round the valves and set of locking nuts.

There 18inch 9.5 j rear etc 38. And same as but 8.5 front. Got 99spec front bumper, type s sideskirts and these all being fitted. Want a smooth oem type look lol. Just hope they don't snap on 1st pot hole.

Hi guys just bought these, they were really cheap on flea bay lol. What do u think, I like the look of them, just hoping the quality will be ok. Anyone else got them. Cheers for looking guys.

Thank u, for reply, Hopefully his good with back bumper add ons, I need one now. Nudge nudge, wink wink, say no more. Lol.

Mad man, didn't need them that desperate, u should have just went to bed. Has said before thanks very much and there great. Think I prefer without door fillers what do u reckon, advise. Did u get email with couple of pics of back bumpers,

There type s, and car Mad is your man. Wanted smooth, and needed something to go with the 99spec cause that has a lower looking front and makes rest of the car look high. Not really one for body kits but all modern cars seem to have skirts covering the seals, and now I can dinitrol stone chip all the seals then paint white and hide the bumpy look with the skirts. Cheers for the replys, and think I will leave door fillers off.

They should look good when it's all painted, got a 99spec bumper too. Got door fillers and don't know whether to use them, quite like them without now lol. Smells of cabbage lol, more likely of fibreglass and allways bloody scratching....

Hi guys, Just putting this up to say thanks to car mad, He even went back to work in the evening to get sideskirts out to me cause I was in a bit of a rush to get them. Just chucked them on tonight no screws or anything looks like they fit really well and don't seem like they will need much or if any prep at all. Couple pics... Cheers car mad. And I will put some pics up when it's all shiney and painted.

Try searching, Boldly..replacing outer hicas ball joints.. There's some pics showing u how. Ain't got a clue how to put it here or I would lol.

Hi if it's the outter hicas joints, u want to remove leave everything on the car, There's a thread on here somewhere how to do it. I cut the front part where the hicas rack bolts too off with a grinder allowing u to knock them out the otherway and get a good hit without anything in your way. Just cut the front off heat with a torch, and get a big chisel and bang away to the bigger comes out. To put new one in used an old socket and hit it back in. Was fairly easy to do. Goodluck and hope u sort it.

Don't know if u have checked already. My full beam stayed on when a fuse in the engine bay popped, at 1st didn't look like it but it was. It was in the little straight fuse box up at the master cylinder area. Hope u solve it..

U can check o2 sensors with the screw on the ecu, do the fault check then turn screw the either way and hold revs to 2000rpm engine has to be up to temp and light should flash on/off on/off showing it change rich/lean, Then if u turn screw the other way do the same thing has above it will do the other 02. I have not done it the manual way for a while, so may be things I missed or done slightly different sure someone will come along if I have said it the wrong way and tell u how to do it properly lol. Goodluck with solving problem.

Hi when mine went I noticed by jacking car up, hold front wheel at 9o'clock and 3o'clock position and try moving the wheel back or forwards if moves there fooked lol. or look at the bush for bad cracks or white horrible stuff dripping. have no pics of bush, but it is a bar with 2 bolts bolting it to a lower arm, with a big round bush the other end with a bolt going right through it. Goodluck and hope u get it sorted.

hi mate have u disturbed ecu in passenger footwell. or on the front of engine where Cambelt covers are there is a metal pipe with 2sensors the bigger one coolant temp sensor if that has come off or dirty will run rough and fan will be on. hope u sort it.

ouch , sounds bad. I'm hoping it's ok now. cause they were all over paint and window. I wiped them off the body with thinners on a cloth scrubbing hard and seemed to come off. all the rust spots in the pics is from the grinding where I ain't wiped properly the whole car looked like that lol white zed with orange spots.

window screen was covered in them. I did wipe it off and seems ok. I hope so cause its a new screen. don't do bodywork and set on my car with grinder and welder, not good lol.

sorry ain't been doing it 2yrs, had shell painted 2 yrs ago, and that's the state of it after just 2yrs. bloody master cylinders lol. I made car look worse where I have been grinding all the little bit of metal have stuck all over the car and gone rusty too. looks like spots of rust all over it. thanks for reply.

master cylinder on brakes leaked and took all the paint off, the clutch cylinder is leaking too. and my dodgy patch I welded in, is why one side of engine bay is black put some black paint on it to stop it rusting to I can finish grinding wields and make it flat.. goes in on the 15 for full paint post some after pics when it's all shiny and new looking. thanks for looking.

hi guys done some more to my stupid zed lol, started at 12 yesterday had it all done by dark, and it was bloody cold.... can't believe it looked like this couple years back.. and now this, what a mess..

yep depends on who makes them, but has u found out 10mm the same. stupid tools lol.

oh just see ya done it with 10mm they confuse ya lol.

if u have a 10mm spark plug socket that will fit mate. need a long extension.

hi, was looking on my car the other day, has I brought a jap breaker and mine is UK style seat belts. the door pads and interior cards are very clean in the jap car. seems the holes are there to bolt the belts in the UK doors but the thread ain't, but could get the nuts that fit from most supplies shops and either tack them on the back with a mig before fitting doors. I have had to do the same cause my car was jap and fitted UK belts into normal place. again holes were there but no nuts on the back so tacked the nuts on. would be easier to put nuts in then re do the interior panels.