j1mmytt

Its down to your own taste at the end of the day. I like it coz its similar to stock but kinda on steroids :D

Well measure with your fingers how much space there is from the corner of the tyre to the inside of the arch. Thats how big they will have to be to be close to the arch.

Ok heres how i did mine. Same as smw really BUT..... on the passenger side you can smash the top of the sensor then you can put on a nice socket and crack the fooker off :D Drivers side is a bugger tho but it should come off, mine came off complete with the boss haha. :D you will need a crows foot for that one unless you think u can smash the top of that one too :D

Ive fitted mine in the best place :D very discreet.

I love hoodies. I just dont use the hood much.......

You will need more than 9mm. You should go for 20mm-25mm hub centric bolt on ones. Ive seen how far in yours are.

and yours looks like a moon buggy. Well i like it and thats all that matters :D

Thats why i will eventually buy one of these: but im struggling to find the make or where to get it from :(

yeah if its the old spoiler i really wouldnt bother with it, they are really heavy and never come off in good condition, best place for it is the bin. They are hard to spray being rubber. Ive just had my rear spoiler removed last week, he was also scared to take mine off as i wanted it resprayed, then i thought.... na its crap, so im also going for the smooth look. oh and i have already got a perspex cover for mine and im taking off the rear wiper too :D Eventually i probably buy another spoiler once i make up my mind :D

Welcome to zed life :D

bad temp sensor vac leak somewhere faulty fuel pressure regulator. Do a fuel pressure test. o2 sensors wont effect your full throttle only casual driving where it helps it run more effiecently.

Only one way to find out, time to get dirty ;)

tell them to get the spolier off with a long wire from both sides like cutting through cheese that will work.

I think, one in the middle attached to gearbox mount and then one one each side on the rear cans

Could you do this to old paint?

At least you can say you gave it a go, thats all that matters:D :D

are you two retarded?

ok heres mine :D but most things have been done already :D 1.need to adjust CAS timing. done, Thanks Andyp 2.find and stop oil leak. (rocker cover im thinking).seems to be cam/crankshaft seals. Done rear main seal 3.new engine mounts. in the post done 4.Find where the hell those wires from the aircon box are suppose to go. (should fix my heating problem, (only wants to come out hot) Done and dusted very chuffed the aircon is working 5.my hazard lights are still not working ive changed the switch twice now, starting to get very annoyed with that. 6.done wheel tracking. 7.Respray. Booked in 8.done Want to fit rear subframe poly bush collars??? in the post 9.tie rod poly bushings done 10.done new shocks in the post. fitted 11. Steering has slight play in it. maybe inner ball joints or outer. (bottom knuckle has play. one steering rack bush is deformed. Checked inner ball joints, they still have blue grease and look new, previous owner must has already changed them) steering rack bushings solved this. 12.done. front&rear lower arm poly bushings. in the post. fitted 13.Done Be rid of detting once and for all. 14.front&rear camber arms. in the post DONE 15.new steering rack bushings. in post. DONE 16. refurb calipers and paint silver. Done 17.fit braided brake hoses& brake brace. Done 18.Replace differential bushings done 19. ---- NA 20 jack up rear investigate location of knocking noise. Done 21. fit/spray stillen front splitter. 22a.nexus engine rebuild: underway woohoooo Forged pistons (88mm oversize) Forged rods Cometic HG reground crank skim head rebore cylinders 555 injectors 555 ecu Courtesy of Andy P egr bypass Oil pump DONE 22b. fit rps max clutch. DONE 23.rebuild turbos. DONE 24 done NA 25. RR 26. Fit uprated bushings to rear traction arm and camber arms, in post. Done 27 fit Uk rear ARB DONE 28.fit tein ha's done 29. fit clutch booster done 30. Modify intercooler ducts 31. longer wheels studs DONE 32. roll arches 33. 330mm discs DONE 34. Fit uprated smic DONE 35. paint timing covers/rocker covers/mild polish cas and rad pipes Done 36. Paint plenum DONE 37. fit nearside steering boot. 38. fit Steering uj Done 39. Replace Centre carrier bearing DONE 40. Replace rear nearside wheel bearing. 41. Fit uprated adjustable tension rods DONE 42. paint timing covers/plenum cover/balance bar/rocker covers/plenum Done 43.indiglo dials/chrome rings/stainless steel plate DONE 44. Conzult/get this thing running right. Done but still a few issues. 45. Install water injection system 46. Fit aftermarket gauges, oil pressure/water temp/boost gauge DONE 47. Fit crome hardpipes. 48. Underseal DONE 49.Fit water adapter and gauge/wire up oil pressure gauge. DONE 50. Fit new o2 sensors 51.fit carbon slam panels 52.fit crome z batt tie down/coil pack bolts/plenum&throttle body strips/stainless wing bolts. DONE 53.replace front tyres for mot. 54. JD 555's chip fitted. 55. fit solid steering pivot bush done 56. buy and fit cobra bucket seats. 57.Buy and fit ebc done 58.fit, innovate LC1 wideband kit. DONE 59. New fpr fitted, . new rad cap . new pvc hoses . temp sensor and connector 59. purchase and fit liehgtwieght propshaft. Done 60. purchase and fit bigger oil cooler. 61. adjust handbrake cable DONE 62. purchaand fit front strut brace. DONE 63. investigate high oil pressure (dodgy gauge maybe) DONE 64. purchase and fit Braided clutch line. GB DONE 65. Fit glowshift gauges, Oil temp/air,fuel/fuel pressure. DONE 65.Fit new Slave cylinder with Dot 3/4 fluid done 66. buy and fit uprated Rad 67.buy and fit series 2 ptu. Done 67.replace diff. 68.Refill diff oil "Kaaz lsd oil" Done... OMFG The old oil was as thick as glue. 69.Driftworks Hicas lock/z1 hicas hose bypass tube. in the post woohoo 70.FIt & spray wings west rear skirt, car booked in for some spray work (roof bars in black too) 71.need to replace rear lower shock bushes in post :D

Just buy the profec b now si :D:D go go go :D a black one.

it was all the fashion back in the 80's 80's yeeeeeeee

ahh so there is such a thing as c bolt ones ;) they seem handy then. yeah mine are T bolt ones.

No i think they are T bolt i duno the difference haha C T erm duno but they are gooder ones :D Just looked and yes they are T bolt ones i dont think there is such thing as c bolt :( oops my mistake.

This is why these kinda things never work. Pisses me off :( sorry. i know people are busy and have their problems etc but thats just life i suppose, id of prefered to just buy me own bottle to save the hassle of waiting for peeps.

then all you need is the profec b or one of the other old school smaller ones.

Nothing discreet about one of those babies, if your after discreet go for the profec b spec 2 like you originally wanted, or are you going to be using all the avcr functions?