iain knight

Thank to all for a great time

I've got my hands up...!

sounds good for the Hadleigh 300zx Club....!

well lad's the 27th will be soon upon us, so is it going to be the brewers fayre then or some were else?

emailed over to you.

It took me about just over 2 hours dew to a striped out track car, I found a walk though from the twinturbo.net site which i'll email it over to you?

They cut the power down until you get grip then give it back so on, also if you were going around a corner and you plaint you foot in the shag pile a bit to soon it stops you from losing the rear end completely. Most of them have launch control.

I’ve just finished installing my Race Logic Traction Control unit and I was just wondering who else as it fitted and what you think about it?

I shall be around in the after noon about 2.30 if that any help, my address is 39, IP7 5SE for your sat nav if got, if not my mob no. 07802832363

I have Nissan datascan which is a kind of conzult if thats any help? I live in Hadleigh.

yer no problem's, it a Zed any way but I think it will come up with a error code 1001 (no turbo's fitted.....!) (-;

sounds good to me, any thing you what me to bring? I will have my Nissan Datascan with me!

Are you just being a tart again, next you'll be having blue lights in side.....!

I'm in, any date's/places in mind? piza hut, mcdee's or a pub?

I love driving the old girl, and keeping another zed up and running so I'm in for another year chap's

Thanks all, in the sun with a can of cidre working on the Zed, What more do you need....!

I've just pick up a MAP-ECU2 second hand but never fitted with parts missing, can you tell what the resistor value is and what the spec ot the IAT(air temp sensor) is 2k2 ohm at what temp ie 20deg or 25deg as i'm trying to sorce the parts, Thank for any help iain

My first try at carbofibre which sorted of worked ....! but it will do the job. The fan unit is from a pug 206 which was kicking around and I think it's about 150W-180W motor which should keep the Zed cool this summer....! when it come back !

mine only cost a £5 and works fine, it not hard to do. If only I could work out how to get a small vid up I would show you....!

only if I have the money, I would have this one....! http://www.quaife.co.uk/shop/products/qbe60g-0 QBE60G 60G 6-speed heavy duty in-line RWD sequential STRAIGHT-CUT gearbox, with Nissan 350Z fitting kit The new Quaife 6-speed heavy duty in-line RWD sequential gearbox has been designed as a direct replacement for the Nissan 350Z gearbox, and incorporates a modular gear cluster on 80mm shaft centres. Quaife has returned to its first principles with this new heavy duty in-line gearbox, opting for a cutting edge, clean-sheet design. The result is a new 6-speed sequential unit, the QBE60G, which weighs in at just 38 kilograms. (plus bellhousing and gear lever mount) Designed for rear wheel drive applications capable of handling up to a maximum of 300 lbft and 375 bhp, the QBE60G offers ultra-rapid and smooth gearshifts, allied to superior strength and reliability, and even features paddle shift compatibility. The Quaife 6 speed heavy duty in-line RWD sequential gearbox has been designed with open face dogs on both the gears and drive discs to allow for easier gear inter-changeability. The Quaife 6-speed heavy duty in-line RWD sequential gearbox has a drum type sequential gearchange system which produces a positive engagement with the gear lever position options. QBE60G customers can specify long and short input shaft options QBE60G according to customer preference and three ratios sets are available, in either straight cut or helical tooth forms. This gearbox has a NEW bellhousing and ger lever mount to fit the standard Nissan 350Z positions. The QBE60G uses standard Nissan clutch and release bearing (not included) and standard Nissan output flange pattern.

hi all, was some one looking for a adaptor kit for a 6-speed trany to z32...! here the link http://www.jimwolftechnology.com/news.asp The 350Z & Infiniti G came with a very strong 6-Speed transmission that is starting to show up more and more at the auto recyclers, making for a reasonably priced option for other high-powered Nissans. Unfortunately, it sports an integrated bell housing, making this conversion difficult at best. By scrounging an automatic tranny bell housing from an automatic that was fitted to the same motor you are adapting to, this adaptor ties everything together. Either the 07+ 350Z Concentric Release Bearing or an aftermarket C.R.C. (Tilton) can be used. The no longer used VQ35 bell housing is cut away and the new adaptor replaces the original front sealing cover. This adaptor can mount a 6-Speed to a VG30DE(TT), SR20DE, KA24DE, or VH45DE engine. Adaptors for the VK56 and others will be available soon after the release of this adaptor. Contact Ben for release date or other information. 619 442-0680

I’ve had rabbits for a long time now, I take it he’s about six months to year old, if so he is a sex craving teenager and he’s got urges.... ! He should be neutered. If you have him done this time of year you will need to keep him inside for a few day because after the Operation they need to keep quiet and warm. Rabbits can go into shock very quickly after trauma or a Operation. Hope this helps you and your sex craving teenager bunny. If you print out the picture of my bunny, he’ll have a pin girl….!(her name is Willow and she is a Duchess AKA tart)

I call my "Nessy" after Nissan....!

we will dig out the engine crane and fix the seals ready for new engine...!

Have faith Andy, we can rebuild the engine. What we can't do is lose another Zed. Will strip the engine down and see what has gone wrong then fix and rebuild.