Andy sxzx

if they are fixed to the cat snip em off fold back into the hole where they come from

I mot d my car one month early if failed and the garage told me that on the data base it would show up as a fail so the cops could do you

is it an auto ? if yes then push the gear selector forward when in P keep your hand on it and turn key

just seen your other post have you been messing with the egn wires that wouls explain a lot go back to the last thing you did and undo it:D

try taking the wires off the battery wait 2 mins then reconnect then try to start

do they go dim when the key is turned is the car used daily try battery leads /check if its got plenty of power alarm stater wires might not hear the pump cos its already up to pressured

Do you get any lights on the dash?

I have just done this have looped the pipes right side to heater matrix pipe and the same to the left side I used fuel pipe as I did not trust vac pipe

Had this trouble on mine for the mot have you tried adjusting them jack the car up wheel off there is a hole in the hub stick a screw driver in and click the adjuster so it just bite then do the other side take car for a drive and on a clear road just pull hand brake on 2 to 3 clicks this will get rid of any rust in the hubs worked on mine

Could anyone tell me if the S13 coil pack connectors are the same as the 300 zx tt ? Thanks

or MJP Eastern auto

yep stan's your man :bow:

as said clean up the pipes if they are not pitted then they should be alright

AH HA found it the seach finger is your friend any houses going for sale near you Mr DUFF :bow: :bow:

Erm belt wrap technique? Works EVERY time ????????could you explain please

Andy not only are you the man on Zs you make a bloody good ref too

thanks Scubie/Fry1 will do

18 views no help :(

Hi hope some one can help me out going to do the lifters[300tt auto] what gaskets do i need and where can i get them also going to do cam belt so want a cam kit as well thanks :duffer:

lifters maybe do a search shed loads on the subject

4 / if you have no know how then I would get some one with know how or you could end up with a whole lot of trouble

lifters ??? the boys that know will be along shortly

put a good rust killer on before painting

just heard about this on the SXOC [am a member] thinking of joining the 300zx if you will have me be nice to meet new peps and put names to faces

thanks jezz have a set of s13 ones in the garage