Andy sxzx

Z is not going to be ready for this been let down on parts order went in a week ago should have been here last weekend really p***d off

Me and the Mrs will be there :)

also does http://cgi.ebay.com/ebaymotors/eBayISAPI.dll?ViewItem&item=360180747407

http://cgi.ebay.com/ebaymotors/90-96-NISSAN-300ZX-COIL-PACK-INJECTOR-CONNECTOR-12-PACK_W0QQcmdZViewItemQQ_trksidZp3911Q2ec0Q2em14QQhashZitem53dc492b21QQitemZ360178068257QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories you can get them here as well

think ebay do a kit have a look on there £270 ish

just think of it like this if it takes a little longer to put in your money stays in your account longer bonus is you don't use the petrol if your not using the car

I don't have any peanuts :p

sorry to crash in but I have the same trouble dan can you let me know how you want paying :bow:

don't forget the conection at the right hand side of plenum think its yellow easy to forget :( I did

check oil presure first if good change the oil take it for at nice easy run 30mls should do it then it should sound sweet same thing happened to mine

lifters

got them on mine no problems so far

I used the 6''

try to use a puller will save a lot time and as said they are not a lot of money even if you go for a cheap one off ebay

there is a little blue pill for a floppy gearstick :D no more beer now till tomorrow JAE :nana2::nana2::nana2:

Have you checked the com gauge is tight in the plug hole or the threads not holding pressure

I used fuel rubber 8mm pipe works a treat

just had mine changed and went for the blue uk one much better than the brown tint and could not wait for 8 wks

If you can get under the car take the starter motor out and stick a good strong flat head driver into the teeth of the ring gear then a long bar and socket worked for me and no danger of having a bar flying into the air and you will not fook the belts up

next you will tell us you still sh*g:shock: makes me feel young reading this thanks

Thanks:duffer:

well out yesterday parked up in the garden went indoors had a cupper went to check the oil and stuff and saw a flipping great crack in the screen it did not happen while i was out anyhow phoned national screens and they are coming to do it Saturday seem to think seeing a thread on here about needing new strips because the old one is bonded to the screen?anyhow national said I would not need them because on the computer it said it didn't :wack:can anyone shed some light on this?

grind the threaded part off heat so the ball comes out and twat it with a hammer and drift that's how I had to get mine out but will warn you that plastic they use to surround the ball stinks and make your eyes smart

do the bypass then you only need 8mm I did mine with fuel rubber pipe did not trust the silicon vac pipe and you can't see the pipe tucked under the side of the engine but I did renew the vac pipes with si

no