arthur

My Z creeks when I reverse out on the road, could be the targas could be the whole car being excited at going out onto the road!!

I have Continentals on mine, they are okay. Problem I believe soft tyre good grip- low milage! Hard tyre more miles not too much grip! Higher milage? Do we have a so called specialist on this? Or is this just trial & error!! Arthur

I was lead to believe 225 front & rearfor N/A & 225 front & 245 rear for TTs?:confused:

Hi Fas I ordered before 3pm & the bushes were with me before 12 noon next day from the Z centre, they cost £42 set + pp. Alot of them have fitted these. Why not phone Jeff@ Zworld hes the specialist. My poly bushes get pressed in tonight for fitting on Saturday. Arthur

Hi Fas, I am in the process of fitting poly bushes from Z center as loads of guys from this site seem to have fitted them! If there good enough for them its good enough for me! Arthur

Another day another Q! OK I got the Tension rods off & at night! There are only two nuts to undo then the nut & bolt of the bush. I managed to get the bolt out because I strained the Tension bush or angled it to enable me to remove the bolt. There are metal pipes on each side of the nut & bolt! My question is with the new poly bushes fitted I am not going to have the same amount of play to get the tension bolts back in! In the Manual it looks like you have masses of space, well thats crap! cos its was very tight getting the bolt out & imho its going to be even tighter getting the bolt back in! Or am I just making a fuss over nothing & its all going to fit back real easy (not!) Any thoughts from you who have done this please. Arthur

OK! leave car where it is. Will move it when back together. thankx Arthur

Hi zxc! Trouble with Zs is the work needing doing is very labour intensive! There aint no room, the engine massive, engine bay small! Head gaskets do not tend to cause big problems like a big end going causing metal to be cast to every corner of the workings! Put another message up askin for help, get a quote on how much it is going to cost. what u can do & what u cannot! Then take it from there! lol Arthur

8pm Tuesday night! Tension bars off Z. Poly bushes pressed in tomorrow. Z in drive, can I drive Z 40ft into garage slowly! very slow? With tenson rods off, or do I leave Z in drive?:confused:

Andy's no is 01634-221783

Hi Trev First try Andy z think he is listed in trader forum. my rad went same place but I did not know alot about Zs then. Still don't!! lol Arthur

Chris, where did you buy THAT pair from!!!!!!!!!:)

Got my PIAAs £28.82 a pair 55w-85w from a dealers in Faversham

Contacted Luke from Z centre. Poly bushes on way & arrive tomorrow. What service! Contacted local enginers who are going to press old bushes out & put new ones in. They have a Fly press that does the job. Replace arms on Saturday! Thats the plan.

Hi Ben Im not the one to say how much you would get for it whole or in bits. If you do brake it up the vultures will swoop! I would also contact Andy for his advice, you had better make a good list of things before you do it! Arthur

Hi Ben thought I would jump in with two feet! Seems very drastic measure for an oil pump & locks to scrap a Z! I take it you have ask for prices on these & of course the people who can REALLY help, like this forum? A tough choice to make if you know the money aspect of getting these things fixed. Good luck mate. Arthur

Hi Mark thanks for that will look at it asap & will give Bob a ring. Arthur

I think my bonnet catch squeaks will try a bit of tape! Talking of turning the music up, my music box is original Nissan tape/radio/cd. Seen better days. Halfords are doing a 12 CD/tuner JVC for £149 from £199 has anyone seen this & any comments about the quality of this system?

Hi chaps Got the bulbs £1.49 from halfords. My local Nissan could not find or have them listed! Nice mover with great curves. What section in the manual is the female bit B19rks? Very nice. Now whats the best way to wire the thing up? My loom appears not to have any conections for it!

Hi B19rks Thanks for the info will go & find um!

I have fitted a centre brakelight! My problem is, it did not come with bulbs. Will someone be kind to me & tell me where I can get the bulbs from!! (it is off a Z!)

Ok then! Think I wll get them fitted by garage first to see if that doe's the job. Will e mail Luke at Z centre cos Im damded can get him on the fone!

Hi Vijay would a G clamp do the job?

Oh forgot! Do I change ALL the bushes, or just the tension/compression arm bush.:confused: Cannot contact Luke at Z centre! Is it not a diy thing changing bushes?

Hi Simmo Thanx for info will change bushes first. Always torque wheel nuts! Ben on the brakes side I ordered mine from Strano Parts but you can get them from B19rks or Z centre I think. I would speak to them first My pads for your info: AXXIS PBR metal master, semi-metalic. Front only $55 + $38 shipping took 10 days! I also had to order one set of shims from nissan £20. Think you can do better with help from this forum though. Job EASY if I can anyone can. You saw Vjays reply thats what I used!:)