Everything posted by steviecopland
-
350z brembos
That's who I got the photos from. Sorry Andy couldn't remember.
-
350z brembos
If you pm me your e-mail address I will send the photos to you before I go out if you like bud.
-
350z brembos
The bolts and washers cost about £40 from MJP if thats any help.
-
350z brembos
You only have to get the rears welded tho. All four sides need drilled but that's easy done.
-
350z brembos
You will have to do that anyway as the mounting hole gaps on the callipers are different. Did you get the bolts to mount the callipers to the hub? These are also bigger so you have to drill the hub holes bigger aswell.
-
350z brembos
You will also need to get the rear hub lug cut off and welded back on in a different place. I got some photos from someone on here showing what needs done if you want me to send them.
-
Can you replace turbos in situ?
Another hijak, can you remove the E.G.R with the engine in place but with the plenum off?
-
New.ish car for 2008
Stenorth, do you know where to get hold of uprated steering knuckles?
-
Advice with horns......
That's them, cheers mate.
-
99 Spec - Here's one in Japan
Seen one on e-bay today with a starting bid of £2.50 + £6P&P.
-
Advice with horns......
Took the bumper off my car and found only one horn. Went to halfords and got some horns as I belive there shuld be two. Can anyone tell me if the Z has positive activated type or earth activated type. Also will I need to fit te relay that came with the or just connect the wires up and see what happens? Cheers Steve
-
nano copter
I got given one and crashed it (cheaper version). When I took it to the shop to get them to show me how to get it to hover, they pointed out that the balance weight was in the wrong place.
-
Big Thanks to steviecopland
;)
-
Big Thanks to steviecopland
Cheers, glad I could help mate.
-
Z or N?
:rofl: :smash:
-
siggy pic
I have been here since Feb, and still can't find out how to do it. P.S 300zx girl Still have not sent it but gave it to my mum tonight when I went to see her and she said that it "WILL" be in the post tomorrow. SOZ very busy at work.
-
Audi S3
:rofl:
-
Audi S3
Am done then. :wack:
-
Audi S3
I noticed you were going on about damage repairable cars. What about the S15. :hyper:
-
Audi S3
The Audi coupe (old thing) is a very nice car and fast. You would also have a lot of £££ spare. I think with a few choice mods that they are a far better car for the spends.
-
Audi S3
To be honest am not sure :confused: . I will see him tomorrow and ask. I would think that it's the lower power one as it's not very fast at all. :nelson:
-
Audi S3
My friend has an S3, feels fast but isin't. Good strong car, but he is fed-up with it now after only 6-7 months. I still have a good time in it tho when I get a go.
-
Blackpool at the weekend 10th/11th
How far is this from Aberdeen, and how long to drive there in a bmw 316 (it's well slow)
-
White Car--Blue or Red Engine Bits????
Red mate, I will go with the light's on the car.
-
Hi Im looking at getting a 300/ any advice?
I'm a rig-mech, work on-shore at the two test rigs at the B.O.D. I have a pipe flareing tool for brake pipes if you need a borrow. Have done the 60k service to the zed also so a belt on a golf should be easy (not wanting anything to do with it tho :smash: ). Give me a PM if you need it mate.