If anyone's interested i've found a novel way of creating these very cheaply.

 

I went to B&Q and bought two shaving lights (one's with a pull cord and plastic cover).

 

I dismantled my rear lights, using a hair dryer along the edge to soften the seal then prized open one end and took out the orange indicator lenses.

 

I then held them over the plastic and cut out to near size as possible and smoothed of the edges with aluminum sand paper.

 

Then i placed the cut plastic back in the light cluster and used Araldite glue in about x4 places to secure them tight.

 

Then i put everything back together first heating the seals with a hairdryer again to soften the sealant and hey presto 99 spec rear lights for £20 a side!!

 

I'll get some photo's in the next day or so....;o)

It's been done covered many times...there's even a kit to do it with too. ;)

Not quite the same as genuine 99 specs, but still a vast impovement from stock. Nice work! (But as Si says covered many times before, sorry :nono: :rofl: )

So show me the link where someone who's bought the lense from B&Q :o)

So show me the link where someone who's bought the lense from B&Q :o)

 

http://www.aus300zx.com/tech/taillight/taillight.htm There ;)

:rofl:

 

;)

Ignore them Alex, they are only jealous, :D top marks for the tip though!

Still no mention of B&Q though!!!!!!!!!!!!

 

Hey Mark, it's because my car is red which as we all know is a faster colour ;o)

 

By the way Si nice car but i see the spoiler is doing it's job well ;o)

cant get the bastted link to paste from last year when i done this :rant: