Hi all, 1st off, i bought my z last year off a friend as a project, it had been stolen from him a long time ago and hot wired, been sat for 9 year till i bought it from him.

 

Ive been working on the ignition and have rejoined all the wires (a temporary measure until i no all is correct )

 

But seem to be getting no power at all to the ignition, many other bits work (lights, electric seats etc) but turn the key and nothing no dash lights, no pump noises nothing, check fuses and relays that i can find but all seem ok, anyone had this issue on a project? Any ideas? Cheers in advance

 

 

 

Sent from my SM-G920F using Tapatalk

Silly question but have you checked the battery? I made that mistake a few months ago, lights were working but the car wouldn't turn over & no dash lights. I dismissed the battery as it was new but turns out it was a dud.

Battery is off my subaru so should be fine but i will have a check on that

 

Sent from my SM-G920F using Tapatalk

Have you checked the starter relay in the drivers side wing?

Would that cause no power to ignition switch? And no no check that, ill strip splash guard out in the morning

 

Sent from my SM-G920F using Tapatalk

Does the car have an alarm/immobiliser?

I dont believe it does mate no, have found no alarm units/sirens or anything like that

 

Sent from my SM-G920F using Tapatalk

Turbo timer fitted?

did you look at the fuse boxes in the engine bay front & at the fire wall (drivers side)..

If its an auto box is it in park?

No turbo timer fitted, yeh i checked those fuses they seem fine, may chuck a load of new fuses in just to be sure yes lol autobox is in park

 

Sent from my SM-G920F using Tapatalk