Whos got 2.5 inch or even 3 inch pipework on there car.from the intercooler and to the tubs and out the other side?

Hi I have the 2.5" setup Alan.

 

Don't think there's a 3" available.

Having recently had all mine out and back on, you would be playing tetris trying to get 3 inch pipes under the bonnet!

I don't think there's 3" for a z32 either, 3" exhaust yes but not intakes. I'd love a 2.5" intake system but there either expensive and don't fit properly or very expensive. Either way you will be importing it.

I didn't fit mine as luckily Jimmer did it with everything else. It supposed to be a right pig of job, though :hammer: even worse if you removed the standard re-circs and fitted BDE goose honk killers :yes:

Im on the hunt

I imagine there will be a performance island and if you go too big it will start to get laggy. That may be 6 inches for all I know but it may not be any advantage over 2.5.

Im on the hunt

 

Worth a look on the US forums for a second hand set. More cars being broken etc

I've got the v2 or v3 AMS 2.5 pipes and didn't have any real fitment issue's. Having a Koyo rad made it harder.

I've got the v2 or v3 AMS 2.5 pipes and didn't have any real fitment issue's. Having a Koyo rad made it harder.

 

Yer but yours will be gold plated dan and your want two large for it. Lol

Jokes aside whats v2 v3

and ams pipes are several hundred pounds

AMS one are the cheap ones buddy.

How cheap

How cheap

 

Have you heard of Google, lol

 

http://www.amsmotorsports.com/shop/ind/300zx-z32/ams-2-5-stealth-black-aluminum-z32-intercooler-pipe-kit.html

I don't think there's 3" for a z32 either, 3" exhaust yes but not intakes. I'd love a 2.5" intake system but there either expensive and don't fit properly or very expensive. Either way you will be importing it.

 

Or make them yourself :D

Is there a picture of all the pipes mapped out on a zed that these would replace? I'm sure I've seen one before

Is there a picture of all the pipes mapped out on a zed that these would replace? I'm sure I've seen one before

 

like this

Perfect lol

Or make them yourself :D

 

That's the plan lol.

I would but and are good friends with power and performance exhaust .but that still said it would take mark ages and cost me .well dont even want to think

If you have to pay someone else it's probably not a viable option.

Can you do it yourself like stephen

if you can route pipes, cutting & bending as needed - then yes

Can you do it yourself like stephen

 

Stephen hasnt done his. He said he wolud like

Ams do a 2.5 inch alumium intercoolet pipe kit.was 649. Now349

And ive just noticed they do tub kits with the ams manifolds .tubs.3 inch down pipes to 2,5inch test pipes and throw in engine mounts to aid fitting.

from a. Ams535r for $3.312.00

And ams 600r fir the same money with z1 motorsport written in the corner of the add.

ams 675rs kit for $3.612

The ams 725r for $3.912.

Ams 800r for $3999.

Did Mark not advise you regarding turbochargers?