my car is pulling to the left had had it aligned 4 times now and still pull left the alight ment is all in spec were it should be done a hunter machine have new rebuild cailper new discs and pads so there not sticking what else could it be dont know were to luck now any ideas people

Tyres could be unevenly worn? Or mis-shapen

there all good tryed swaping them round made no change

Shock or weak spring on N/S ??????

the car seems to be sitting even all round

Check your AR and wishbone bushes too

Failed front torsion bars are common. Under breaking or load the car pulls off. When stationary they appear normal.

changed then for solid ajustable one thinking it was that but didnt change a thing

Mine pulls near shell stations. Is it not just following the camber in the road. Mine does it and it sometimes feels like it really is pulling.

Cheers

Danny

it does it on flat ground tho with no camber

My 300 has been pulling slightly to left for 10 years now.............. :(

 

I have been down every avenue known to man...... No issues with the car, tyres, suspension, bushes....etc.....

 

Alz.

My 300 has been pulling slightly to left for 10 years now.............. :(

 

I have been down every avenue known to man...... No issues with the car, tyres, suspension, bushes....etc.....

 

Alz.

 

i have been reading about other 300s pulling left there must be a reason why this is going on

my last 3 zeds have pulled slightly to the left...middle or other side of the road its perfect. I personly dont think these cars geometry are set up for hard or severe left cambers as thats the only thing i can think of:confused:

yep mine does that too... tracking being done next week so we will see! I am betting that it won't make a difference :(

my last 3 zeds have pulled slightly to the left...middle or other side of the road its perfect. I personly dont think these cars geometry are set up for hard or severe left cambers as thats the only thing i can think of:confused:

 

possible there has to be a good reason why it does it and a fix for it even after i changed all the part you see it pulled left with the geo out and still pulled left with the geo correct could the front sub frame move i wonder it its fixed were its bolted in or is there so play in it as you could put it back in a little bit off if you was to remove it ??

Mine pulls slightly to the right, have to be different I guess lol

maybe there is somthing that can move some how

could it not be down to old hicas, maybe its worn, as said when sitting still or on ramps it could be looking straight but when driving once force is being applied it may pull?

is there any change some one can post some pics of ther z from both sides close up of the front wheel and arch i have i idea

could it not be down to old hicas, maybe its worn, as said when sitting still or on ramps it could be looking straight but when driving once force is being applied it may pull?

 

but the hicas dont move till over 30 or 40 is it this does it even like 10 mph