Dear All,

 

Been a while since I been on here, but the advice I've received in the past has been great. I've finally had the 120k timing belt kit done on Redrum (1995 300zx NA) plus new spark plugs, oil filter, oil change, coolent etc etc PLUS a Stillen cold air intake! WOW! The speed and acceleration is noticeably improved.

 

Now time for another question, I know from previous experience that you cannot adjust the front camber on the 300zx. I know from previous alignment sessions that my front right camber is off by a tiny %, meaning I have a slight pull to the left. I've been told by people on this forum that it could potentially be fixed by putting in a 'Shim' to bring it back into line. My question is, who best to do this? Coz in the past I've had bad experiences at the tracking places, they don't seem to give a s**t.

 

Obviously it has to be someone who has the set up and measurement equipment etc but don't know who else could help with this problem??

 

I'm in London, if that helps.

 

Again, thanks for any advice.

 

Adam

hi mate,

 

best place I have used for tracking and alignment is elite tyres in dagenham.

unsure on the shims but sure they would know for definite what is wrong and how to go about it.

Edited October 24, 201213 yr by Terry

Sorry, not about camber shims, but if you think that a cold air intake changes the performance then you ought to get it chipped !

The shims will be for camber adjustment, if its pulling to one side I'd say its more likely to be a tracking adjustment issue, which any alignment shop should be able to check/adjust.