Right then.. Engine is out if my zed, as is half the loom, the battery, the battery terminals erc...

 

How do i get the ELECTRIC drivers seat to go forward to get it out???

 

Got the front 2 nuts off, but the back 2 are undee the seat!!!

Lol, done this with my windows before leaving them down!

 

All you need is a 12v battery and and connect it to the connection under the seat to give

it some power.

I dont know if i'll get under the seat.

I'lk give it a go.

Cheers

Lol yep have to admit I did the same as you jai, took the engine out realised I left the window down, as jai said battery direct to the wires if the chair goes the wrong way, reverse the connection in the battery

Its not doing it.

Think the battery needs charging..

Sure I just put the battery back onto the car, IIRC the wire that goes to the terminal splits into 2 one for the starter and one for everything else? (just to the left of the brake master cylinder).

As said above the battery back on should work as I am sure the feed to the seats is permanent live.

 

And it does help Jim if the battery as some juice in it :whistling:

look at the thick cable on the seat connector you can work it out which one should be live and earth think its a white wire if i can remember run a 12v cable and earth and power it up

rich