hi drivers electric window has just ceased to work you can hear the motor working in the up position but nothing in the down is it more likely to be the switch or the window motor anyone any ideas please

Take the door card off first, disconnect the main power to the motor then try attaching a 12v battery

But saying that can you actually hear the motor trying to move when putting it down ?

no you can hear the motor trying to work in the up position by the way the window is in the closed position

Check the link out below, most window issues are with the module rather than the switch or the motor.

 

Jeff TT

 

 

http://www.300zx.co.uk/forums/showthread.php?t=137368

 

cheers would that account for the window only wanting to work 1 way namely up

cheers would that account for the window only wanting to work 1 way namely up

 

Usually the symptoms are both directions fail to work, however its possible the track connector solder on another pin has failed so got to be worth a look first, to remove the conrol box there is no need to remove the door panel, just unclip the bottom section in the middle and look up behind the panel and you should be able to see it to pull it down off its bracket.

 

Good luck with that

 

 

Jeff TT

cheers will look tomorrow and post results

I've got a window control module in the garage doing nothing if its that.

cheers mate how much u want for it

bob