oh needs to change the bulbs which are situated in the bumper but cant seem to find how to get to them, is there an easy way or does he have to take the bumper off?

 

 

please help he's doing my head in lol

front bumper ? which lights? fronts you have to unscrew the lens's....and the engine has to come out

yeh front bumper, think they are side lights or maybe fogs

indicator/ side markers have 2 screws just remove them to remove the whole unit and there's a twist fitting holding the bulbs. think the fogs are the same. wing repeaters slide forward and pop out

Edited October 25, 200916 yr by 8ace

those ones :)

eerrrrr dunno lol never taken those out

duno if this helps at all http://www.twinturbo.net/ttnettech/glareguard/glareguard.html

thanks anyway :)

hi take the indicator out put your arm through the hole to the back of the light and you,ll find some nuts that you have to un-do and the whole unit will pull out think there 10 or 12mm hope this helps

thankyou :) :)

this image might help, shows that the screws are covered by a bit of plastic (missing from mine, and excuse the bird crap) a screw an it should pop out from that side, unless there is a cover the other side as well though i might be completely wrong, dunno as i haven't paid attention too them lol.

Edited October 25, 200916 yr by vodkashots

http://www.twinturbo.net/ttnettech/glareguard/glareguard.html

the screw on the side is for adjusting the beam i think

hi take the indicator out put your arm through the hole to the back of the light and you,ll find some nuts that you have to un-do and the whole unit will pull out think there 10 or 12mm hope this helps

 

Exactly what he said.......

 

.......a 10mm spanner removes the 3 nuts and the whole unit comes away from the front bumper.....

 

this image might help, shows that the screws are covered by a bit of plastic (missing from mine, and excuse the bird crap) a screw an it should pop out from that side, unless there is a cover the other side as well though i might be completely wrong, dunno as i haven't paid attention too them lol.

 

Noooo - see below!

 

the screw on the side is for adjusting the beam i think

 

He's right again!

 

Richard:cool:

all sorted thanks again, you lot are stars :D

3 minute job per side. Easy. :)