General Discussions - 300ZX Related

Ebay Wont be using head gaskets, just want all the other ones. User has 0 feedback too :wack:

just a note to let you all know i wont be attending any meets from now on as i am moving to tolouse tomorrow. thanks to t-pot, buddah and johny boy for the few we had down swansea ps please dont be too upset

Saw u near th 50mph bit heading towards Stowmarket. I was in th Tranny van on th other side!

This is how the Nissan 300ZX manual should read on a rebuild..... :dance: :smash: :mac1:

:mad: Went onto a roundabout today about 35-40, just following a freelander then bang, hit a brick and my Tie rod snapped (have i got that right, bit thats attached from front hub to front cross member somewhere, its adjustable) well that sent me round in a circle then into the kirb, only obvious damage is as mentioned above, just wondered if this is adjustable as standard and will it just be the same as a uk spec cars part or is this an aftermarket jobby thats adjustable and any idea how much this will cost me, ill go and get it tomorrow if its available from a normal auto parts store. cheers ryan

Black Zed with black wheels :cool: L reg on Round Spinney (Toby) Roundabout @ 1:30ish this afternoon. The 2nd Zed i've met on this roundabout in a week! Where they come from all of sudden :confused: nowhere to be seen in the summer ;)

Its spose to be a 3.1ltr With: JE pistons Knife edge crank Carillo rods Here are some pics of the crank. Not really knife edge is it?!?! I've also measured the piston bore and its 87.4mm. Would that make it a 3.1ltr? I've had a look at the online manual but cant work out the standard piston size. Not sure on the rods. They are still in. Wasnt planning on taking them out.

Hello, Can anyone tell me how to remove the panel around the head unit? I have taken out four screws but its jammed in there near the digital clock I would give it a good tug but I dont want to break it!! lol!

It's about time we put the 300 on the map, so we're building something for the job. Just thought I'd ask what we have to beat at the moment, in the UK. I'm interested in documented quarter mile times, lap times, top speeds etc. It would be awesome to compete in TOTB at some point, but not till we're ready to really kick ass. So, what ya got? :) Dave.

dirtysanchez... :hyper: have a great day! :D

http://cgi.ebay.co.uk/NISSAN-300ZX-300-ZX-TT-Twin-Turbo-Non-Runner-PX-Swap_W0QQitemZ280046639277QQihZ018QQcategoryZ18238QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Anyone know whats happened to mujina??? or heard from him?? :confused:

has anyone tried a vg30det into a z32 chasis? i know htey come in automatics but its teh same motor as tt it seem slike just with a single intake plem and single turbo. will a 5spd twinturbo or even a na tranny bolt on to this? is htis doable? its been done on z31's so wondering would this work on a z32?

watching trackday warriers on men and motors but no zeds featured as yet, plenty of evo's and scooby shite, few skylines 1 lovely NSX mk1 escort mexico's, 3.1capri's and many more but no bloody zeds why? Answer me that! shit program then :rofl:

hi all, Not had much to post since my zed engine went wrong, smoking badly when revved and 4 outta 6 pistons giving good compression other 2 75 and 0 nearest the windscreen im told its the head gasket but i dont know and here in northwales nobody here to take a look :( the car is a uk tt 1992 model run fine till this little disaster.... For about 2 years i been running a ecu upgrade chip which i got from america but the big question is will this fit my recently purchased japanese import 1991 tt ? cheers guys thank in advance

Drove over to Wales last Saturday, about a 300 mile round trip. Got 120 miles away from home on the M4 when the car started pulling left, getting worse over about a mile. Uh-oh, thought I. Then the vibration starts, pull over and sure enough the front nearside is totally flat, with the pressure marks from the rim down the motorway (see first pic). I unload my bike to get at the spare, jack and wheel brace... um, what wheel brace?! Oh fook I never put it back! :headvswal Quick call to the RAC, he'll be there in 30 mins. 15 mins later, they ring me back- he'll be there in 45 mins! He actually turned up on the hour, but no thanks to the RAC controllers- they s…

I've bought some component speakers to replace my stock (?) kenwood ones. Anyway since I now have tweeters I'm guessing I need some extra wire to connect those to the crossovers. What I'm wondering though is... Is car speaker wire different to home speaker wire? i.e. the type you might buy to extend the distance that your speakers can be placed away from your stereo. Also do I really need to replace the existing wire? Thanks in advance. Al

Folks, I have a knock sound when going over bumps - particularly speed ramps. It doesn't do it every time, and if I go over a speed ramp with my wheels at an angle (ie I turn at the last moment) then it usually won't do it. It sounds fairly solid and like it's coming from the front drivers side suspension. Any ideas? I haven't had the car long so don't really know what I'm looking for. TIA, Tony

Folks, My drivers seat won't go all the way back! :rant: There must be some sort of stopper because the motor winds the seat backwards and forwards just fine, but I reckon it could (should) go back another two or three inches at least. How can I adjust it? Thanks, T

I want to get my car on the rollers to check fueling is OK and its not detting ect. Was going to take it to Thor but Northampton Motorsport is 5 minutes from my house. Has anyone taken there zed to them?

Planning on doing an Auto - Manual conversion on my SWB TT, Is the front half of the manual propshaft the same for a LWB or SWB. Or do I need to hunt down a SWB Manual prop :confused:

HI! is the question truth?? American--->tb25 European--->tb22 By this change of power fron one and another one?

and a few weeks since I sold my zed, the cost of driving has gone down but now the golf is feeling fast I can't help wondering what I'm missing :o) shame it will be a while until I'm in a position to be back in one,

Am thinking of getting a front bumper from these guys: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&sspagename=ADME%3AL%3ARTQ%3AUK%3A1&viewitem=&item=180048005438&rd=1 Seem to be 99' spec ones, they're not to far from where I live, so my go and check them out first, any pointers on what I should look for or ask? snx.

Can someone tell me where all the earthing / grounding points are on a Zed please.