Everything posted by GIBSTER-TT
-
Red Light
mines does it now and again when booting it around for a while! i have no cats but the sensor is still on the exhaust
-
What Body kit this is???
ask for luke!
-
Rear window wiper arm
lift the cap up on the base of the window wiper and you will find a nut! think maybe a size 10 or 12 undo the nut and lift the wiper off job dne.
-
manual/auto throttle bodies question
sorry is that the part where the trottle caple connects to? will it still work the same once ive connected my throttle cable! or would it be easy enough to just swap it over thanx
-
manual/auto throttle bodies question
Hi all, This maybe a silly question! But do both the manual and auto tt zeds have exactly the same throttle bodys?? As ive bought a plenium with throttle bodies 2nd hand to have polished but not sure if its off an auto or manual regards dan
-
clutch recomendations on ebay
ive got an f1 6 paddle clutch from 'gripforce' and soon to have their lightend flywheel aswell. A mate of mine does alot of trade importing clutches flywheels etc from 'girpforce' and has had no problems with the products so far!
-
will these wheels fit??
ok thanx abit confused as i have a set already with spacers on the front and back.maybe they are the same offset???
-
will these wheels fit??
i hope so may bid soon :) thanx
-
f1 fly wheels
hi all has anyone heard or got one of these fitted? a mate of mine has a f1 clutch fitted to his evo 6 and had no probs! also would an ali flywheel be ok with a 6 puck paddle clutch heard bad stories about them chewing ali flywheels? cheers http://cgi.ebay.com/ebaymotors/F1-RACING-PROLITE-FLYWHEEL-90-96-300ZX-TWIN-TURBO_W0QQcmdZViewItemQQcategoryZ33732QQihZ005QQitemZ150164974915QQrdZ1QQsspagenameZWDVWor http://cgi.ebay.com/ebaymotors/NISSAN-300ZX-TWINTURBO-LITEWEIGHT-RACING-FLYWHEEL_W0QQcmdZViewItemQQcategoryZ33732QQihZ002QQitemZ120167408458QQrdZ1QQsspagenameZWDVW
-
will these wheels fit??
hi all, ive got a set of these light weight enkei wheels already in 17" i like the alloys but would like 18" instead does any1 know if the offset of these will fit?the seller does mension a few nissans but not the zed? regards dan http://cgi.ebay.co.uk/18-Enkei-alloys-Honda-Lexus-Maxda-Toyota-EVO-Supra-RX8_W0QQitemZ170154083012QQihZ007QQcategoryZ9888QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
-
Wheel bearings / turbo inlet pipes n tings...
i know 'motor parts direct' do wheel bearings
-
transformers
blue peter style lol
-
polishing your plenium
15hrs :cry: do you know what grades of polish to have! like g3 etc
-
wots the difference 555's 550's
lol will i notice 5
-
silver zed a13 28/sep/07
i see a silver zed on the a13 coming from southend/canvey going towards the 5 bells roundabout at about 11.30 today
-
polishing your plenium
ok as easy as that all i need is some polishing heads then :) thanx
-
polishing your plenium
hi all, is there a guide on here on how to polish your own plenium or what tools to use as im going to give it ago myself thanx
-
wots the difference 555's 550's
what is the difference between them for my 1991 jap spec tt . regards dan
-
chipped ecu help!
thanx for your help ill have a look again 2moz. does a stock ecu still have 2 circuit boards? because where you see marios chip (above) i have another circuit board that mounted above that??? regards dan
-
chipped ecu help!
Hi all, has any1 got any pics of a chipped ecu! (inside) as ive bought a chipped ecu off a member here but still not 100% sure its been chipped or not.it has a sticker on the outside saying cecil sport and also a sticker saying genuine remanufactured nissan ecu. ive opened up both standard and chipped ecu's but theres not much difference except on the 'chipped' ecu the circuit board thats mounted off the main circuit board is a little bigger than my standard 1. if that makes sence at all lol regards dan
-
nismo 555's
great was hoping this was the case! thanx for your help
-
polished plenium
great no probs then :) thanx
-
polished plenium
Hi all, has anyone had any over heating problems with polished pleniums? as im looking into fitting one if they dont cause any problems. :) regards dan
-
nismo 555's
Ive been looking at buying some pre 94 nismo 555's injectors for my zed as a few of you on here have advised me to do. But ive found some worrying info on another zed site in canada after looking for info on the injectors on google.Has anyone had this trouble??? Well, now I know why I keep eating so many fuel injectors. Apparently it's normal for Nismo 555 injectors to last only a year in the 1990 to 1994 300zx... http://www.twinturbo.net/net/viewmsg...msg_id=1535571 Some more comments from Greg @ SpecialtyZ: We have had many,many,many nismo 555 injectors fail in the last couple years and nismo will not do anything. some of the early style injectors are only lasting a couple months. Since the fuel changed with alcohol content they are all failing extremely soon. I feel for you that your experiencing problems with nismo injectors and you are far from alone. What is happening to the injectors is that they are corroding the internal connection and causing an open circuit. The injectors are not getting shorted coils from running past their duty cycle. The early style injectors have positive 12 volts all the time. The fuel formula changed a few years ago and they started adding alcohol to the fuel. Since the time the fuel was changed the injector failures of cars with early style injectors is through the roof, (brand new and original early style injectors we are replacing several a week). It is believed the alcohol and having power to the injectors is causing electrolysis and eating up the connections internally causing the high failure rate. They are not having this problem in Japan and they make fuel the way we use to without alcohol. The injectors were originally designed for fuel that we do not have any more. The stock injectors use to last 10 years easy and we hardly ever had failures......Now we are having to replace stock injectors that have already been changed in less then a year all the time as well as original injectors failing almost daily. The late style injectors are wired to the ECU differently and do not have power when the key is off. By old style, I mean the 1990-1994 year style injectors. The new style injectors that were used in 1995 and newer Z cars are completely different in design and require different code in the ECU and do not have power going to them from the ECU until the key is turned on. They also require a different fuel rail to bolt them in. They are not directly interchangeable. It requires different fuel rails and machining of the lower intake manifold to accept the newer style fuel rail. It also requires changing the injector electrical plugs and ECU chip. You absolutely have older style injectors because that is all you can use without major modification and changing all the injectors to the late model year style. Your only option at this point is to replace the one bad injector unless your willing to go to the expense of replacing all of them and doing the modifications to change over to the complete new set up. Nismo is aware of the problem now and we have a lot of documentation. We are hoping nismo comes up with a solution for direct replacements. I am recommending to people doing upgrades currently to change over to the new style now they we know there is a problem with the old style injectors combined with our current pump fuels. For years the Nismo 555cc injectors were a great relieable injector. Other company's selling injectors for the early application are assembled the same way and the ECU program for the early style injectors has the ECU sending power to the injector all the time adding to the electrolysis problem. Mike Smith and JWT are looking into ways to help the injectors live longer by wiring the injectors differently. This is still in the testing stages and we are hoping to offer at least a patch of some kind to help with people that have these injectors. I feel your frustration, I had to change 3 of the 6 injectors in less then a year on my personal 300ZX that had the HKS 2530 turbos......I replaced them all with the newer style 740's and fuel rails when I put JWT 700 turbos in this last year. I still have all my 555cc Injectors in my 280z that has the twin turbo motor and Greddy TD05 turbos. I did wire this car myself when I did the engine conversion and I do not have power to my injectors when the car is off. This just happened by accident because I wired the car and the fuel injection relay does not have power until the key is turned on. Greg __________________ Canada's Nissan & Infiniti Tuning Specialists!
-
peeps with illuminated ignition ring
i thought mine had been played with and wired up wrong to the side lights. i would of thought nissan would of designed the light to come on when u open your door so you can see where to insert your key :rolleyes: