cybernet

18.73767% - Geek I think that wearing glasses must have tipped me over the edge ;) Steve :)

LOL - very funny :rofl: Steve :)

You'll need a sump gasket and possibly a replacement strainer depending on how much crap is in there. I got mine from Mike @ MJP Steve :)

Where do you reckon it's from - sounds worrying :( Steve :)

All prices are on my traction control web page HTH Steve :)

Might be worth bleeding the system to make sure you've not got any trapped air. Would recommend the bleed nipple under the bonnet on the driver's side wing. Loosen the nipple and get someone to pump the clutch. When fluid starts to flow from the nipple, it should have expelled any air. If it's not the above, the pedal may need adjusting HTH Steve :)

Errrrmm yes, but this one didn't ;) Steve :)

Got to say I agree with DG's actions. Part of me still wishes I'd had a go when I had my car damaged a couple of months ago. :( Glad the scum got what was coming to him. If these people realised that there are consequences for their actions, they'd think twice about fooking with other people's property Steve :)

The strainer is the odd shaped silver jobbie held in with 3 bolts. Take the strainer out and you'll be able to see the contents Here's a pic of my bro-in-law's which was badly blocked ... HTH Steve :)

I've booked her in for the welding work - next Tuesday :( If anyone up my way has some room, maybe I can jump in with you? Let me know by PM if this is a possibility... CheerZ Steve :)

:D :rofl:

The following systems are suitable for the Zed... RLTC6A - analogue controller system with adjustable slip RLTC6AL - analogue controller system with adjustable slip and launch control RLTC6DIA - digital controller with adjustable slip and launch control Launch control will only work on manual cars. Note that you must have ABS in your car for the above systems to operate. If you do not have ABS installed and operational, you will need a set of wheel speed sensors (TCWSSSET). Be aware that I should be doing a RLTC group buy in September. I'll keep you posted. I can carry out installation and supply the above. Let me know if this is of interest to you or if you have any questions. CheerZ Steve :)

Corroded passenger sill needs to be removed, replaced and rewelded. New sill arrived today but I need to get a move on tomorrow and find a welder as my mate can't do it (no ramps) :( Steve :)

Just got back from a short break Chris - glad to see you got this sorted bud :cool: Steve :)

Got the car back bud. MOT failure needs to be sorted :(

LOL - just noticed the date. I've only got this week to get the car back on the road and I'm away until Tuesday night :rolleyes: Steve :(

No probs Paul - will be great to see both of you again :cool: CheerZ Steve :)

Japanese Performance Sunday Wellington Country Park, nr Reading, Berks Open from 10 am Japanese Performance Magazine's very own outdoor show – masses of cars and loads of trophies. This has been held at Hickstead Showground in previous years and we've always had a great turnout :cool: Free Trade Stand space for Advertisers with Japanese Performance Magazine Clubs welcome Refreshments Commentary Please vote or post below if you're up for this :) If there's enough interest, I'll reserve us some club space :D CheerZ Steve :)

Looks like a great day. Nice pics :cool: Steve :)

IMO Nissan put it there for a reason and it does help to channel the air through the rad. Keep it! I've got one in the garage which I'm about to prep and paint for mine ;) Steve :)

Size it first, then upload it to your rides section, open it from rides, right click on it and choose properties. Then highlight the Address info eg: http://www.300zx.co.uk/forums/smilies/banana.gif and right click and copy. Go to edit your sig, type after the link Save the sig and it should now work ;) Steve :)

I've not had a shroud since I upgraded to my Koyo Fas. Not really noticed any probs with running temp, but I've heard that when stuck in traffic it can make a big difference on a hot day :( Steve :)

Does anyone know where the targa drain comes down? I guess I'm going to have to hack off the corroded section anyway :rolleyes: Steve :)

Thanks for the info fellas :bow: I've got a mate who's a retired welder and another who runs a bodyshop so hopefully I'll be able to call in a couple of favours ;) Steve :)

6pm-9pm Comet car park by Madjaski Stadium in Reading. Just off the ring road at junction 11 M4. Postcode for Comet is RG2 0QG HTH Steve :)