karlosg

shattered an intercooler !! fokin hell

100% on a track !!

Yep ok a Ecutek remap also. And reason for bends etc is who wants to race in a straight line , as there is no skill involved in that at all. Also even if u want a straight line race cos ur scared of the bends just say bud :tongue: also few stats 4 ya: ZED: 0-60 mph:5.5 secs 0-100 mph: 13.9 Quarter Mile: 14.1 secs Horsepower: 300 bhp @ 6400 rpm Torque : 283 lb-ft @ 3600 rpm Weight : 1582kgs EVO: 0-60 mph:4.7secs 0-100 mph: 12.7 Quarter Mile: 13.5 secs Horsepower: 280 bhp @ 6500 rpm Torque : 282 lb-ft @ 3500 rpm Weight : 1320kgs

THIS WILL NOT GOING TO BE A STRAIGHT LINE RACE EITHER, THERE ARE WILL BE BENDS , CORNERS ETC INCLUDED ON THE PRIVATE RACETRACK !! Car spec is : 2001 - evo 7 gsr Blitz sus air filter. walbro 255 fuel pump 50% larger S/S turbo elbow (3" internal ) Apexi cat back exhaust stainless steel manifold Ecutek remap running 21 psi max All the rest ALL STOCK PARTS :tongue: but dont forget stock means: Brembos 320mm front brakes and 300mm rear, front mount intercoolers, 560cc injectors , td05 tubby, intercooler water sprays, 4WD with Active Centre Differential,Active Yaw Control Rear Diff with 4.529 ratio !! let alone all the rest !! :rolleyes:

LMAO no probs bud , Bring it on !! best of 3 and all proof shall be posted. Place your bets !! And as for over 60 being killed :rofl: :rofl: !!

yeah get that video posted up bud on putfile or something like that , got the hi res version but is huge if needed. Yeah the evo sits much higher than the zed , couldnt believe how much by actually !! but as for the race , tune in for part 2 !! the 2 tone baldy mobile shall be left in the dust !! ha ha kiddin bud

here u go : details on a single and dual catch can setup advise i got from Eric. I'm using 2 small catchcans, both the size of a small beercan and both with 2 inlet ports. I've connected the high ports to the L+R pcv valves and the low port of the can to the L+R ports that are on the intake rocker covers (under the plenum). I plugged the holes that are left on the hardplastic intake pipes and the pipes that originally ran to the pcv valves (which come from the rear pipes that originate from the ports on the back of the right exhaust rocker cover.

its my boss at work and the main bearings are shot and toyota are quoting 2k to repair !! :eek:

need to get a replacement engine for a toyota avensis vvti 2001 model any ideas where to get a low milage replacement or any idea on pricing ?? help

http://www.300zx.co.uk/forums/showthread.php?t=41496&highlight=side+exit

hapy bday bud

Jaffa is the man to ask for this , he has some and got em at a good price too

here u go , 18" alloys with brand new eibach springs on and brand new stock shocks .

happy bday bud !

yeah he bought it , sent it back , got a refund and then bought it bak again for cheaper !!

1) normally fluid level - double check and also check for leaks, 2) thats normal except for the boost level , Will sit at 0psi until engine started , Then sit-7 until driven then boosts up between 9 upwards depending on what boost your running. 7 psi however indicated , Safety boost. Get a conzult check done bud and yes code 34 ( det sensor) will put you in safety boost.

they were changed as car went back to ryans for additional engine work, T25's came out and sold to a forum member and the Mitsi tubs were fitted. Reason was I wanted more power !!

already voted but number 2 pls

far left hand side bud, to the left of the balance bar and back a bit. You will see a l shape non return / check valve and pipes coming ut of both ends. The clutch booster is right behind the clutch pedal which you can see if you get a torch out or get under the car.

I had a blowout in a an orion at 70mph on the motorway whilst in the fast lane!! My tyre flew off the rim and almost hit a couple of motorbike riders and near missed by paul stevens ( on the site) ! luckily got it over to hard should without writing it off.

:eek: :eek: I paid £75 from z-tech about 1yr ago now for ecu upgrade and jets fitted!!

or add a resister in 10 mins . :D

no where on that dyno run does it say RWHP either !!!

wtf !! LOL

have a good one paul