mantav8

Well he's half right :eek:

Can't say I have seen one Steve-might be quicker following the pipe through the car-have you got compressed air?[no I don't mean a flatulence problem :eek: ] you could try blowing it through. BTW-Ta for the HID kit mate!-works spot on :duffer:

Just off j27 of the M1 bud in Hucknall-as for the bulb,remove the connector,pull off the rubber boot,look into the hole and you will see a retaining clip-you have squeeze this together and un-hook it from the ally ring. Then you can remove the bulb-new one goes in reverse order but make sure the bulb is sat correctly-it has a semi circular cut-out and a square one so it only goes in one way! Good luck! :)

You won't have the right bulb then mate!!-nissan part really or luke does em' Don't help I know-pity your not closer as I have two spare since fitting my HID's :(

Steve if you can hear the pump running it is most likely a blocked pipe/jet etc also check the pipe hasn't come adrift somewhere[look for puddles where they shouldn't be any!] :D

Set?-you should have one that has only two pins on it-is yours a uk or jap?

Which side mate-not that there is alot of difference but I'm sure it's the o/s that's easier IIRC.Have you got a new bulb? cos they are H3c caps! On a positive note-yes you can change em' in situ but it's a bugger of a job!

The washer bottle has two pumps-one rear, one front. Operate the front one and see which pump runs........the bottle is in front of the o/s/f wheel behind the bumper! :rolleyes: When you suss out the pumps, take the connector off the rear wash pump and stick a test light on it-now operate the rear wash.If the light is lit the pumps kaput! HTH. :)

LOL!-fekkin ell' Pete-let me get me own zed done first!! :rolleyes: seriously bud,if you want a hand[or doing for you!] give us a shout :cool:

If the weather is kind tomorrow,I'll be doing the finishing touches and takin' plenty of pics-think a few peeps wanted to do this IIRC.

For your information bud,there's no such thing! :D

that's right Neil-you tell em' mate!..................... :confused: :wack:

Happy birthday mate! :D

aww cheers guys.............thought ya forgot! Had a pleasant day on the drive working on the zed and actually acheived sommat :eek: -the perfek birthday :D

Clever fooker! :D -finally sorted it today!! I got a self lifting bonnet...........woohoo! :hyper:

Lets see who's the first to notice!! :D did you get it???? :nana2:

39-today! :cry: ......still got a new digital camera off the wife :D

Why don't you all lay off this guy?-just ignore em' neil....... ;)

''Don't know what to do with me hands when there aint a fag in em'' :shock:

Errr....no! :p Will be nice if i ever see the fekkin bumpers again :rolleyes:

I take it you ''removed'' the bumper mate? ;)

FFS!-will you guys stop it!-ya gonna cost me a fortune :headvswal :D

Looked into doing this and basically forget standard type struts as there is no-where for them to sit in the closed position!! So have ordered a pair of vectra hinges and struts and gonna give this a try!-still not going to be an easy mod though-think plenty of grinder/welder use is the order of the day!but we'll see :smw:

:( :( :D

FFS!!!-John!, what you go and do that for???-I like the look of that, now gotta rip that panel out and get a six pot!! Bugger :wack: