Paul Thompson

I know it's a little simple but are you sure your not overfilled with oil ?????

Lol

My windscreen. Mine is a Jap import and it looks like the windscreen has been fooking sandblasted. When the early morning/late afternoon sun shines 'I can't see shit in these shades' :cool: :rant:

John Dixon or Andy P

:rofl: :rofl: :rofl: :rofl: :rofl:

The guy is a top bloke and a god when it comes to Z's ;)

Look here :- http://www.zcentre.co.uk/shop/product_info.php?cPath=21_23&products_id=78 Says for UK and Jspec, TT AND NA 2+2, so aftermarket are probably the same although the exhaust (if the same for NA/TT) will be louder on a NA due to higher compresion.

V Nice :hyper:

Slightly more whistle and I love the sound of the recircs. I suppose you could take your standard box out and give it I try for a few miles, can't do too much harm. Or ,as in the old days with carb's, you could put your mums, g/friends tights over your maf LMAO :rofl: :rofl: Just for test purposes of course

When I fitted my Apexi I heard a little more roar as it were, but you could deffo hear the recirc's were alot louder, now a nice subtle ppsssttt instead of a PPPPSSSSSSSSHHHHHHHHHHHHHTTTT you get from BOV's. I like it ;)

FFS gutted

Yep, same here :mac1: rattles, creaks, sh!tty tweed and the damn last wipe when you switch the front wipers off :rant:

I fitted universals, 1 last week and one yesterday, seems to run fine and a lot better than before as one was fooked. PITA to do.

MJP in traders section

Errm, no, just the cam belt :slap: :nono: Should have done the tensioners and all the other parts as well but £ did not allow at the time

DIY, took me and me old man about 5hrs, 1st attempt also

Mine didn't fit very well, the hoses to the TB's fitted 'OK' but the other two (the inner ones) I had to fit the other way round (back to front sort of thing) So the TB's pipes look fine but the writing on the inner two is upside down :rant: Fitting is a bit of a fiddle. But construction seems fine.

Well I found the duff relay, RL1, took the cover off, it has burnt out contacts. But I also burnt out a transistor on the board testing the other relays :rant: :headvswal So, does anyone have a duff, knackered board for a Baxi boiler they don't want I can use to replace the fooked components ? CheerZ Paul

CheerZ dipone, 105e, not instant. Anyone know where I can get the schematic for the PCB from ?

Interesting, section D, and looking at the PCB it's looking like either 1 of 2 or both relay RL5 and/or RL6

Bearing seems fine, what will happen is power will be applied to the fan for a split second, hardly registering on my meter, then no power at all and fan continues to spin freely for around 1/4 - 1/2 a turn

Lets start from here. No the fan only starts say 1 out of 30 times, spins for around 3 second, gas fires up then off. All other times the fan spins around 1/4 revolution then stops. DaveMan, I have tested the switch (blowing down the pressure pipe and sucking (leave it :slap: ) the vaccum pipe and the switch appears to work ok and have metered when the switch switches and that seems fine also. DaveMan, Yeah I was hoping it was something other than the PCB but having read on the net the relays fail after around 2 - 4 yrs (board was replaced 2yrs ago) if I can find out what relay, no problem. yewcheck, you got a board I can borrrow for further testing ? although I think the part number for my board is AFAIK CheerZ all

See them pop up on ebay from time to time

Should have a front AND a back cover LOL Sure you can get a Haynes manual for the Z31

Yeah I've got that, Im getting fan/flue fault as described on page40, Goto section E but it all seems to check out ok. The pressure switch and flue is out of the equasion as the fan isn't starting.