vijay

if you want to have the high level with a stock look underneath it, I have that part in fiberglass ;) (so you'd use it together with Craig's part)

Another question on the subject, can you write a film to a rewritable DVD disc and play it in a normal DVD player and then when watched just put another film over it? The reason ask is cos I remember something with normal cd's that it had to be finalized (or something like that) in order to play on a normal cd player.

I'm planning on having my interior done this year. Personally I think if you're gonna get a shop to do it, you'll get what you pay for. I've been to a couple of shops that have shown me their work and I couldn't believe they were trying to sell it!

Are you ever in NW London? I may have some spare (will have to check). All you'll have to buy is some tubes and maybe some cable. Or check toolstation which is cheaper ;) http://www.toolstation.com/documents/search/index.html?searchstr=Fluorescent+Batten+Fitting+LPF Vijay

has to be an NA as they're different sizes ;) I had 2 but think I threw them :( Can check tomorrow.

I'll be getting some stuff from my mechanic hopefully over the weekend, supposed to be brilliant at degreasing and cleaning alloys. It comes in a spray bottle and is water based. Will let you know how I get on.

who cares when you drive past the petrol station selling diesel for near £1.20 ;)

Might be worth finding out if they can run on veg oil or bio, you can save a fortune ;) Vijay

Best bet is to call Mike Feeney (trader on here) on 01277-374201 and see if he can help :)

would a brick sealer work, the stuff that you paint on and it creates a clear barrier.

Get some contact cleaner and clean every contact you can get to in your engine bay. Make sure the coilpack, PTU, CAS and MAF connectors are spotless. The cat overheat light is basically unburnt fuel igniting in your exhaust, so overfuelling. Cleaning the contacts will more than likely sort it.

Cheers bud. It was the third link where it saw it says there's no requirement on size

Makes sense :)

Just been searching through some google hits and it says there's no legal requirements for the size of rear fog lamp, surely that can't be right?

lol, you're right, that was a bit lazy of me ;) Thanks for the info though :bow:

Hi, Does anyone know the legal requirment for the fog light size and location? Cheers Vijay

but won't he need the cap for the thermastatic rad valve as it will open up slightly when cold? I've had that issue in the past.

You can get them from Mike Feeney in the traders section :)

Steve, Just upload them to somewhere like Photobucket and put the link up ;) Vijay

http://www.potholes.co.uk/

that seams to work :) thanks guys

Wanted to add them. Just tried splitting the cells but the lines don't line up (can only get them either side of the lines above/below)

no idea what make/model the turbo is but will try and find out :)

Got a question about a document that I've attached. If you look on page 3 & 6, to the right of the page is square boxes but there are gaps where there are no lines, how do you add them in? Cheers Vijay

or you can add a bottom spoiler ;)