pete-TVM

I would of said something is not right with your viscous fan. It should be moving, but the clip only shows it at the end as the engine is turned off. Mine spins for a bit after turn off. does your's move at all whilst running? EDIT: Just saw the 2nd video :smash: i'm not sure it should stop dead after you kill the engine, but then I ain't no mechanic!!!

My p reg mondeo's on 268,000 no probs!!! Now wheres that bit of wood???

I'm going to join the few!! I quite like it too!

Hi, I did a plenum bypass a few months ago using smithy's vac hose. I've had no problems with it all. HTH. Pete

Hi I've always used Partition Magic for copying HD to HD, but looking at their site it looks like they've been bought by Symantec :mac1:

Found a useful link for many makes and models, including zeds. Thought it would be better suited in the FAQ area maybe, but couldn't decide where so plonked it here instead! Wheel sizing Pete

I've just replaced my oil pressure switch and can confirm this.

I believe if you display red at the back, amber at the sides and white at the front you are within the lighting rules for public roads. More info here: http://iceled.co.uk/area51/viewtopic.php?t=2738

I've just redone my interior in leather and used "no more nails" Seems to work fine and grips the leather after a few seconds pressure!

aye, working too :rolleyes: maybe next year :cool:

Is it me or am i pissed? but all those photos, esp front page, look photochopped???? :duffer: :duffer: :duffer: And his wife...... :hurl: not to my personal taste :tongue: :)

What he said :D

Mine's be off the road getting on for 2 years :eek: All i've been doing is the timing belt and fitting some gauges. :shock: ^advertisment for why you shouldn't smoke weed^ Don't know you're personal situation, but i'd say keep it and finnish it, as Chunk says "it'll be worth it" At the end of the day though only you can anwser the question :)

I thought thats what you get when the heater matrix goes :rofl:

Paid for renewal by paypal today :dance:

You could get the real deal for a few quid more :dance: wouldn't want to get it serviced though! http://cgi.ebay.co.uk/FERRARI-328-GTS-WARANTY-COVER-INC-PRIVATE-PLATE-AIRCON_W0QQitemZ4630297298QQcategoryZ18180QQrdZ1QQcmdZViewItem

sure do, take your pic!!

It's not bad! Used to grow mushrooms in it, but we've got five others for that :hyper: Hoping to get a full workshop set up eventually with ramps, tyre changers etc and a fibre glassing room. Loads of space! we've got my 300, 3 bikes, 15 foot speed boat behind camera, festa xr2 and a david brown tractor!

Been off the road over a year now! Hopefully middle of summer and i'll have it back together minus a few bolts :rofl:

last one

next

Just took a few pics with my phone so quality is crap!

1st of april?????????

lol i figured they should pop out but they just disintegrate around the bit i pull on ! After more investigation i have found the drivers side pcv hose where it joins the intercooler pipe has broken off and been stuck back on with loads of electrician tape :mac1: and on both valve covers there are no gaskets just a lot of silicone sealant :mac1: :mac1: So tomorrow i'm gonna get the plenum off and see what else i can find. I sense i'm gonna be spending large amounts of money soon! Pete

Hi bods! As part of the 60K service i'm doing the cam seals, or attempting! The seals are well and truly stuck. I've tried heating them, wd40, seal pullers (home made and bought) and now i'm stumped! They seem to be melted in place either that or the guy who do it last glued em in! :mac1: I think i'm gonna have to start stripping the engine down, but before i do does anyone have any ideas? Have no pics ATM but it's the intake cam seals i'm doing. Help much appreciated Cheers Pete