Hello I have had this FET360 turbo timer for about a year now but never got around to rigging it up and have no idea how to! Originally it was out of a nissan so probably strait forward to wire up??? Theres a small white plug with a yellow, red and white wire connected to it, Theres 4 other wires which are black, white, grey and white with brown lines any ideas where these go?? Heres some pics so you can see what im on about!

 

 

 

 

Any help would be great!

Hope this helps

 

http://www.300zx.co.uk/forums/showthread.php?t=29201

Cheers Groover! I will have a good read a bit later when iv picked the kids up from school!!

Iv been trying to find any info on the net about this turbo timer but there is nothing I think I know where most wires go? but there is still a white and a grey wire that I have no idea about? any advice???

turbo timers are pritty easy to install.

 

as long as you know which wires are what on your timer!

 

most jap ones are the same (HKS, Greddy) same colour wires etc

 

iv never seen the one you have? need to find out what colour wires are what on your timer.

 

connecting them to the car then is fine.

 

just as a guide, there are usually:

 

3 wires to the ignition barrell,

1 to the handbrake,

1 to the ground,

1 to the ECU)

turbo timers are pritty easy to install.

 

as long as you know which wires are what on your timer!

 

most jap ones are the same (HKS, Greddy) same colour wires etc

 

iv never seen the one you have? need to find out what colour wires are what on your timer.

 

connecting them to the car then is fine.

 

just as a guide, there are usually:

 

3 wires to the ignition barrell,

1 to the handbrake,

1 to the ground,

1 to the ECU)

 

I know that the three wires goto the ignition plus the 1 to the ground, theres 2 white ones the one with the brown stripes must be handbrake? the other I dont know? which comes from the key lock adapter and the grey must be the ECU wire? wherever that connect to on ECU I dont know??