Each Size = 268CFM @ 21" with 1.2PSI Pressure Drop
Well they arrived, these however are not the godspeed coolers, i was informed that the godspeeds are a chinese copy, these ones i bought are more expensive but made by the original aussy designer, who knows if there is a difference!!! they look massive and well built anyhow, apart from the inside end tank which is actually quite big just seems small and out of proportion to the size of the thing.
The godspeed coolers seem as though they have been discontinued for whatever reason!!!
Here are some pics to show off their size next to my pc monitor which is a 19inch i think.
These coolers have a large section on the top which will not see any air unless the fog lights are removed and a custom air duct is made, this is still something i need to do before i can test them fairly. The fogs are removed which should let in some air for the time being.
Another thing i should mention is the tops of the indicator stalk come in contact with the cooler this is easily fixed by removing the rear bracket that holds the cooler inplace, then the cooler can be repostioned just enough to stop the contact. without this bracket there is still the front bracket and hoses to hold it in place so i wasnt worried about removing it.
These will not fit without the CC removed so i Managed to find some time to do a CC bypass aswell as fit these. The problem was that the carbon canister metal piping was in the way so i cut this lot off and did the necessary bypassing and tubing to make space for the new cooler. It is recommened to remove the CC anyway as its very restrictive at letting air out the back of the cooler so this was a bonus :D
Core Size:
280mm x 200mm x 90mm thick
with 2" in/outlet
Flow Results:
Each Size = 268CFM @ 21" with 1.2PSI Pressure Drop
Well they arrived, these however are not the godspeed coolers, i was informed that the godspeeds are a chinese copy, these ones i bought are more expensive but made by the original aussy designer, who knows if there is a difference!!! they look massive and well built anyhow, apart from the inside end tank which is actually quite big just seems small and out of proportion to the size of the thing.
The godspeed coolers seem as though they have been discontinued for whatever reason!!!
Here are some pics to show off their size next to my pc monitor which is a 19inch i think.
These coolers have a large section on the top which will not see any air unless the fog lights are removed and a custom air duct is made, this is still something i need to do before i can test them fairly. The fogs are removed which should let in some air for the time being.
Another thing i should mention is the tops of the indicator stalk come in contact with the cooler this is easily fixed by removing the rear bracket that holds the cooler inplace, then the cooler can be repostioned just enough to stop the contact. without this bracket there is still the front bracket and hoses to hold it in place so i wasnt worried about removing it.
These will not fit without the CC removed so i Managed to find some time to do a CC bypass aswell as fit these. The problem was that the carbon canister metal piping was in the way so i cut this lot off and did the necessary bypassing and tubing to make space for the new cooler. It is recommened to remove the CC anyway as its very restrictive at letting air out the back of the cooler so this was a bonus :D
Edited by j1mmytt