Hi All,

 

Just decided to start getting my hands dirty, lol Only takin 15 months :x:

 

have taken a few pics of engine bay but seem to have afew bits missing, can anyone give me a clue??

 

Have marked a couple of pics with yellow arrows, what size bolt is meant to be there?

 

Also my s/s fuel line is just laying over the engine, whats missing?

 

Does it look straight enough??

 

1992 Jap TT Auto

 

Any help appreciated :)

There should be 2 rubber lined P-clips that keep the fuel lines off the plenum but still running correctly.

The 2 arrows to missing bolts from holes are from where the old fuel lines were attached, so can stay missing.

Missing bolt from top of coil pack is M8 X either 12 or 15mm x 1.25 thread.

smithy

Last pic is a banjo bolt from one of the oil feeds - nothing to worry about unless you have oil pissing all over the floor lol (just an old one left there after being replaced)

There should be 2 rubber lined P-clips that keep the fuel lines off the plenum but still running correctly.

The 2 arrows to missing bolts from holes are from where the old fuel lines were attached, so can stay missing.

Missing bolt from top of coil pack is M8 X either 12 or 15mm x 1.25 thread.

smithy

 

Cheers for that Smithy, at least nothing major, have spent a great deal on sorting mechanical problems out since bought last Feb, now want to upgrade as I go.

 

Regards

 

Gary :D

Last pic is a banjo bolt from one of the oil feeds - nothing to worry about unless you have oil pissing all over the floor lol (just an old one left there after being replaced)

 

Cheers Andy,

 

Not anymore lol, has been in for various oil leaks (Four last time) I found the said bolt wedged at the front of the radiator whilst looking around today.

 

Cheers for your help, no doubt when I start to upgrade I shall be back for assistance :D

 

I'm great at taking things apart, putting them back together is another matter lol

 

Regards

 

Gary :)

Out of sheer curiosity?

 

Where do you suggest I start?