I have changed the fuse. What fun that was. My hazzards and High beams work but no indicatirs. any suggestions.

 

Thanks

 

Konrad

sounds like a defective stork to me :)

Thanks Joely P

Any ideas on where I can get one besides Nissan

AndyZ in the traders should have one fella

idd he prolly will, put an advert in the 'items wanted' section, plenty of peeps breaking cars atm can help you out :)

Check the hazzard switch is returning to the off position fully because if not the indicators do not work, usually the fixings in the pod are the problem as it causes the hazzard switch to get jammed.

 

 

Daveman

The indicators have a seperate fuse from the hazards , and ( presumably ) the main beam .

B*gger , just remembered , that was my ole Prelude . Still , could be a similar set-up in the Zed ....I stand to be stoned to death and corrected . :D

hazard switch definitely most likely cause - had same problem on mine as the plastic mounts had snapped so the switch couldn't quite return to the off position!

Ditto the hazard switch problem.

those pods are shite, guaranteed to break on removal.

i had the hazard problem

Check the hazzard switch is returning to the off position fully because if not the indicators do not work, usually the fixings in the pod are the problem as it causes the hazzard switch to get jammed.

 

 

Daveman

Wow! thats exactly what it was. Thanks a million.

 

Konrad