I bought an Rps Street clutch new from z1motorsports and have only done 2000 miles ish, i haven't abused it either and its just started slipping ! Just fr your info the pedal bites around half way up ? can anybody please give some advise as i cant afford to buy another one right now.

 

thanks guys

Flick through this link below mate, it's a general thing that "can" happen shortly after fitting ANY new clutch unit.

http://www.twinturbo.net/ttnetfaq/FAQpages/clutchadjustment.html

Cheers

smithy

Big thanks to smithy !! What a Good Guy

Or it could be a fault with the cluych booster, Mine was

pressurising the wrong side of the servo diaphram and

depressing the master cylinder, disconect the booster

vac line and plug it, then see if the clutch slips

if the ajustment doesnt help, then i hope you checked the flywheel or had it skimmed, otherwise any ridges lips on the surface will eat a clutch like the cookie monster eats cookies LOL

if the ajustment doesnt help, then i hope you checked the flywheel or had it skimmed, otherwise any ridges lips on the surface will eat a clutch like the cookie monster eats cookies LOL

^^ spot on.zed flywheels tend to get a hard time and nothing will finish a new clutch like a high spot on a flywheel.

if the ajustment doesnt help, then i hope you checked the flywheel or had it skimmed, otherwise any ridges lips on the surface will eat a clutch like the cookie monster eats cookies LOL

 

Owe you one Greg :p

i didnt take the risk and had a/market flywheel installed when i had my RPS clutch installed. mind you, only 200 miles on them so far so touch wood :x:

thanks for all your help guys hopefully sorted fingers crossed x