Obviously not a zed engine!

 

http://video.google.nl/videoplay?docid=2341426527730806107

 

edit - just finished watching it myself, quite a good vid for anyone who fancies throwing some spanners round, to see whats involved. Although times it by two and add in the fact that you can't actually reach anything on a zed unless you have hands like ET.

so 20 mins for a Zed engine then...... :rofl: :rofl:

 

cool vid bud ....

 

..

PMSL at the guy playing with his nob in the background when the lad is sticking his tongue out at the camera :rofl:

They make it look so easy, why did it take me all day just to get the bloody intake plenium off!!! thats before i realised that to remove the heads is mission impossible 4. cool vid though.

3/4s of it is speeded up. lol

B*gger they lied, it actually took 17.5mins then..................

Thats what I didnt get. The video is actually 10 mins long but its speeded up. So its not a 10min rebuild like they say.

10 min!! yyeeahh RRIIIGGGHHHTTT

speeded up and being picky i never seen them place nuts and washers on the manifold, he put it on and got is spanner on it straight away :confused: alot of editing, cool all the same though.

speeded up and being picky i never seen them place nuts and washers on the manifold, he put it on and got is spanner on it straight away :confused: alot of editing, cool all the same though.

 

 

is it a bit of your green eyed monster..coming out there bud.....

 

ok bud how long would it take you .... :p ;)

 

1/2 day's ..... :rofl: :rofl:

 

 

...

Cool vid but he aint goin nowhere near my engine.

 

He didn't measure crank clearance on the mains, no stage torquing of the head bolts, in fact he didn't even torque the mains studs down or head studs, and what looked like cords rings they chew your bores to pieces.

is it a bit of your green eyed monster..coming out there bud.....

 

ok bud how long would it take you .... :p ;)

 

1/2 day's ..... :rofl: :rofl:

 

 

...

 

a day, if everything is needed, but theres always something that holds it up, every component they have used looks like its out of a box :p

 

thats half a z32 engine anyhow.

a day, if everything is needed, but theres always something that holds it up, every component they have used looks like its out of a box :p

 

thats half a z32 engine anyhow.

 

 

 

that's why i said 20 mins .......10 a side .........

 

so IF you had to build an engine(Zed of corse) how long would it take (new bit of corse).......

 

the clock is ticking ..bud..... :p ;) :rofl:

 

..

even at twice the speed 20 mins its still not a bad rebuild.

that's why i said 20 mins .......10 a side .........

 

so IF you had to build an engine(Zed of corse) how long would it take (new bit of corse).......

 

the clock is ticking ..bud..... :p ;) :rofl:

 

..

 

6-10 hours from block to finish, but im far to lazy and slow to do it in that time, i normally spend half the day with stuff in the parts washer cleaning, but if everything was laid out in order like above 6hours sounds reasonable

6-10 hours from block to finish, but im far to lazy and slow to do it in that time, i normally spend half the day with stuff in the parts washer cleaning, but if everything was laid out in order like above 6hours sounds reasonable

 

 

 

ok bud 6 hours it is ......what's the ""BET""...... ;)

 

 

....??????

 

..

While your there,check this out! :shock: :shock:

http://video.google.nl/videoplay?docid=-8874841720989383932

6 hours? Stop spending half the day pickin ur nose then :tongue: LOL

 

A PROPER build should take a full day - nice to see someone actully gapping the rings though! So many people just throw them in and expect everything to work perfectly :rolleyes:

6 hours? Stop spending half the day pickin ur nose then :tongue: LOL

 

A PROPER build should take a full day - nice to see someone actully gapping the rings though! So many people just throw them in and expect everything to work perfectly :rolleyes:

 

as above^^

 

im not picking my nose just blowing it ;)

While your there,check this out! :shock: :shock:

http://video.google.nl/videoplay?docid=-8874841720989383932

 

...and here's it running :)

 

http://video.google.nl/videoplay?docid=5687552003238909056&q=eight+turbos

pah, reckon i could have done it in 10 mins without speeding it up with my buzz guns & air ratchet!! :p

I reckon it took 10 mins to get the piston rings on alone :D

Took me half a day to get 8 Wiseco circlips on the piston gudgeon pins! :rolleyes: Remember that greg? :D

Took me half a day to get 8 Wiseco circlips on the piston gudgeon pins! :rolleyes: Remember that greg? :D

 

 

It took me a while to get the first one in yesterday. Once I got the hang of it I was flying. The last 4 pistons only took 15 mins to do. :D

Took me half a day to get 8 Wiseco circlips on the piston gudgeon pins! :rolleyes: Remember that greg? :D

 

yeh there a fookin nightmare :D :mac1: ;) , in comparison to something like arias, where they just screw in via sprung steel, POP