what have people done with the 2 slots for cd player? i have a cd player in 1 and the other is empty. why is there 2 originally?

There is 2 as the stock one was a double unit, cd on the bottom radio and tape above.

 

Some of the pos a nes had a telly in the top slot.

 

Ive got the stock cd player in the bottom hole to fill the gap and my sony cdxm1000tf in the top.

I put 3 gauges under my CD player like this http://www.zcentre.co.uk/interior/radioslot.htm :dance:

 

Obviously the guages I have are a weeeee bit better than the ones pictured ;)

I have a nice install for my boost controller and tubby timer in the slot which isn't occupied by the stereo.

ive got a cd player in the top one and a pocket for change ect in the lower one.

My top has got my CD player in and the bottom has my Apexi RSM and the remote for my Profec E01 lol

im liking the gauges in there. got no aftermarket gauges at all. what is the 3 best gauges to go for. im guessing boost, oil pressure anything else important

what have people done with the 2 slots for cd player? i have a cd player in 1 and the other is empty. why is there 2 originally?

 

See Luke.......I did.

Um...I did this ;) (Touchscreen Monitor Fabricated into console)

 

 

and previously I had this : (tripple DIN Gauges)

 

top cd radio in the bottom boost controller and timer.

Blanking plates from 'zcentre', then cut whatever into them or drill extra switches, really good. Also does a flip lid one i think, put change in and stuff.

i like them gauges legrath, who made them and what are they measuring?

im liking the gauges in there. got no aftermarket gauges at all. what is the 3 best gauges to go for. im guessing boost, oil pressure anything else important

 

I went for oil pressure, water temperature and boost

Um...I did this ;) (Touchscreen Monitor Fabricated into console)

 

I like that very much...nice work :bow:

i like them gauges legrath, who made them and what are they measuring?

Autoguage smoked range I think.

 

They were measuring Oil pressure, Water temp & Volts. Then I have a matching Boost guage in A-Pillar

Head unit with Blitz SBC and ID meter below

 

 

CD/SD head unit, with sprung door pocket below (Z centre sells 'em, before you ask ;))

 

I had a little storage area, for sweets! :)

did have cd player above with storage tray below.

 

 

now have legraths old gauges below! :nana2:

Legrath, that must have cost nearly as much as the Z. lol

CD/SD head unit, with sprung door pocket below (Z centre sells 'em, before you ask ;))

 

This is also what I have done sprung cover just seems to finish it off IMHO

I will be going for 3 guages in it. Just in the middle of ordering the -pillar mods though.

 

A-pillar will have Oil temp, oil press and boost.

 

Radio slot will have water temp, volt and something else.

 

Dave G

 

I shall be doing domething similar to this, except I will have a head unit underneath.

I like the 3 gauges, how much does that cost to do??

I put a cd/dvd player head unit on the bottom and a motorised 7" flip out monitor on the top just 2 weeks ago :)