after a previous post, i understand that the UK 300ZX is restricted to 150 mph..

 

 

how do you remove this?

 

is there a chip for the ECU or what..

 

 

how much too

An after market ECU will do it, speak to John Dixon. UK's are limited to 155mph. Japs to 180kmph

A km to MPH speedo conversion will sort that out too..........cheaper than ECU if you plan to keep it stock..........

 

Mine is from Import solutions and has worked great http://www.importsolutions.co.uk

A km to MPH speedo conversion will sort that out too..........cheaper than ECU if you plan to keep it stock..........

 

Mine is from Import solutions and has worked great http://www.importsolutions.co.uk

 

 

Not if it is already a UK !

see above

Not if it is already a UK !

see above

Apologies for my thickness peeps :headvswal

Are these any good? They seem cheap...

 

Clicky

Are these any good? They seem cheap...

 

Clicky

fitted one in mine and it runs great better than the superchips chip that was fitted before and 14psi boost

Cool.... So no probs then? Is it just a simple swap or wot?

 

When I chipped my last car I just swapped the chip over, idled for 20 mins and Bob was my proverbial uncle! Is it a similar process to this?

Yoiu will probably need a chip to get to much over 155moh anyways. THink a stock Z will do bout 170ish.

Are these any good? They seem cheap...

 

Clicky

 

 

I'm interested in this as well, has anybody else bought and used this type of product or dealt with this seller, any comments welcome.

cheers

David

chip arrived a week after i bought it u need to be good with soldering iron to desolder old chip and fit new one (or a tv repair place could do it for you) that can be tricky boost jets are easy,

:D cheers

I can socket the ECU for you if you need it.

I can socket the ECU for you if you need it.

A better option than just soldering the new chip in, as you could just simply change it in the future if you needed to. I'd recommend Andys work, as mines running very nicely since he did mine, cheers Andy mate :bow: :bow:

I can socket the ECU for you if you need it.

 

Cheers for the offer of help Andy, but by the sounds of the reply to my email (below) to the seller everything is included, any further advice though would be greatfully received.

Cheers

David

 

Hi,

 

yes this is suitable for jap spec, fitting instructions are also supplied, to install the ecu chip you kneed to de-solder the old chip, in its place solder a chip socket (supplied) you then insert the new chip into the socket. all you kneed to do then is insert the boost jets (supplied) in to the vacuum lines. instructions are step by step with photo's. you will not be diapointed.

 

z32_partrs

Just ordered one!!