Arrived home from work tonight to discover mr postman has delivered me some top shiney stuff

 

:dance: STILLEN :dance: STILLEN:dance:

 

I know you lot probably already have these bits but thought i'd share it anyway as i just cant get over the total bLiNgEyNeSs

 

 

Mahusive THANKS to Danny @ DTA who went out of his way to get everything sorted

 

:bow: :bow: :bow: :bow:

 

Arrived home from work tonight to discover mr postman has delivered me some top shiney stuff

 

:dance: STILLEN :dance: STILLEN:dance:

 

I know you lot probably already have these bits but thought i'd share it anyway as i just cant get over the total bLiNgEyNeSs

 

 

Mahusive THANKS to Danny @ DTA who went out of his way to get everything sorted

 

 

 

 

 

some nice bits there bud

 

iv been busy all week fitting bits! post some pics up tommoz when i clean my bay :D

Nice blingy-bling dude :nana2:

love that strut brace m8

how much did that rob you

and whats the other stillen thing for

Nice blingy-bling dude :nana2:

 

 

some nice bits there bud

 

iv been busy all week fitting bits! post some pics up tommoz when i clean my bay

 

 

CheerZ fellas :cool: .....Just cant wait to fit it now....

 

Krsmayo is gonna help me (well actually...do it all :p ) to fit my AVC-R boost controller before the NISTECK meet....

 

Sooooooooooooooo much to do

 

Sooooooooooooooo little time to do it in :D

 

dont forget to post up ur blingy underpulleys greg...

love that strut brace m8

how much did that rob you

and whats the other stillen thing for

 

 

hicas eliminator

 

and battery tie down

 

blackmagic told me to tell you :slap:

love that strut brace m8

how much did that rob you

and whats the other stillen thing for

 

 

i havn't stoped drooling since i got in..mmmmmmmmmmmmmmmmmmmmm

 

:smash: £160 ish :smash: for rear strut brace...Bargain

 

:shock: £250 ish :shock: for HICAS eliminator(other big shiney bit)

 

 

 

 

 

 

Just had to have it..looks so much better machined than others i've seen.

Not some thing i could knock up in me garage :smash:

hicas eliminator

 

and battery tie down

 

blackmagic told me to tell you :slap:

 

ive got the batt tie down

but where does the hicas eliminator go ??

never seen one before

hicas eliminator

 

and battery tie down

 

blackmagic told me to tell you :slap:

 

 

LOL... :rofl:

 

There goes greg again....

 

Whoreing it up where ever possible :eek:

 

FPMSL :rofl: :rofl: :rofl:

 

Just as well u answered bud as i take ages finding each key on me laptop...................

 

Wonder if this cider is helping :confused:

ive got the batt tie down

but where does the hicas eliminator go ??

never seen one before

 

replaces your HICAS system.

It fits underneath at rear of car....in line with the rear track rod ends.

removes loadsa gubbins and saves loadsa weight....

got a piccy ...1 sec bud

replaces your HICAS system.

It fits underneath at rear of car....in line with the rear track rod ends.

removes loadsa gubbins and saves loadsa weight....

 

And you can't see it!!...................... :smash: :D

And you can't see it!!...................... :smash: :D

 

Unless you get run over by a bling Zed :D

i havn't stoped drooling since i got in..mmmmmmmmmmmmmmmmmmmmm

 

:smash: £160 ish :smash: for rear strut brace...Bargain

 

:shock: £250 ish :shock: for HICAS eliminator(other big shiney bit)

 

 

 

 

 

 

Just had to have it..looks so much better machined than others i've seen.

Not some thing i could knock up in me garage :smash:

 

loads a dosh

thought it was a front strut

do they do a stillen front strut brace

Unless you get run over by a bling Zed :D

 

 

no use then though you will be zed feet under :rolleyes: :smash:

some nice bits there that strut brace is the sh1t

no use then though you will be zed feet under :rolleyes: :smash:

Ditto! :wack:

loads a dosh

thought it was a front strut

do they do a stillen front strut brace

 

Errmmm.....in short ...NO bud

 

Stillen used to make one but have since stopped producing them :cry:

 

Dont know why as the front looked just as good and i definately wanted one but it was a no go....Straight from the horses mouth in US of A.

 

yer...was loadsa Zedtonions but I wanted properly machined equipment as opposed to some of the stuff i've seen that i could off knocked up in me garage with my clarke welder :eek: :slap: :)

 

As for getting a front strut brace...havn't seen any around that are suitable...some come to close to the plenum especially when it starts to move under torque....and some are just plain flimsy that couldnt brace a lollystick.

well.....My m8 does titanium engine parts for aston martin race cars and we are currently looking into making a bLiNg special with some engravings or drillings to totally round up the bling factor...(think KrsMayo wants one of these as well :rolleyes: ).

 

I will be sure to post up the piccys of this when finished as we are still in the design process at the mo.

 

:ttiwwop:

some nice bits there that strut brace is the sh1t

 

 

:bow:

 

 

 

 

:duffer:

Errmmm.....in short ...NO bud

 

Stillen used to make one but have since stopped producing them :cry:

 

Dont know why as the front looked just as good and i definately wanted one but it was a no go....Straight from the horses mouth in US of A.

 

yer...was loadsa Zedtonions but I wanted properly machined equipment as opposed to some of the stuff i've seen that i could off knocked up in me garage with my clarke welder :eek: :slap: :)

 

As for getting a front strut brace...havn't seen any around that are suitable...some come to close to the plenum especially when it starts to move under torque....and some are just plain flimsy that couldnt brace a lollystick.

well.....My m8 does titanium engine parts for aston martin race cars and we are currently looking into making a bLiNg special with some engravings or drillings to totally round up the bling factor...(think KrsMayo wants one of these as well :rolleyes: ).

 

I will be sure to post up the piccys of this when finished as we are still in the design process at the mo.

 

:ttiwwop:

 

sounds great

good luck with it and keep me informed

i have been looking for a decent , yet different front strut

will defo be interestedin one, if they turn out ok

sounds great

good luck with it and keep me informed

i have been looking for a decent , yet different front strut

will defo be interestedin one, if they turn out ok

 

 

OK TiZer......will do.

 

Its a balance between weight/strength/size that were toying with at the mo....

 

Alloy...Titanium...Alloy...Titanium....

 

Alloy is lookin better so far as the strength of titanium is far too much just for a strut brace and costs an absoloute fortune....Although it does bring the bLiNg factor up a few notches... :cool:

 

HHHMMMmmmmm....Decisions decisions....

ive got the batt tie down

but where does the hicas eliminator go ??

never seen one before

 

 

Found it eventually TiZer.....try this:-

 

http://300zxclub.com/faq/90-93300ZXHicasEliminatorinstructions.pdf

I've been trying to get a Nismo front strut bar for ages. Courtesy have now stopped doing them :( Old link here. I think that Vinz has this one in the Bling Mobile... :D

 

The rear one is apparently still available here

 

Steve :)

I think that Vinz has this one in the Bling Mobile... :D

 

Maybe not - the "300ZX" on the Nismo one is in the middle. Looks like Vinz has a custom bar....

 

 

Steve :)

Maybe not - the "300ZX" on the Nismo one is in the middle. Looks like Vinz has a custom bar....

 

 

Steve :)

 

Vinz has a standard front strut brace (like we used to sell) and had it engraved & chromed.

 

Let me see if my Japanese supplier can get hold of Nismo front strut braces.

 

;)

 

Danny