is this possible? i had a go this weekend and it looks permenantly fixed, if it can be done then how?

 

yaseen

is this possible? i had a go this weekend and it looks permenantly fixed, if it can be done then how?

 

yaseen

Yasseen these are put on with snap bolts which as the name suggests the head snaps off them when they are in place so they can not be removed , the only way is with an angle grinder or dremel etc or if you think you need some exercise hammer and chisel, after that there pretty much rendered useless

 

Ryan

Park it up in Liverpool for 20 mins, soon be off !

Yasseen these are put on with snap bolts which as the name suggests the head snaps off them when they are in place so they can not be removed , the only way is with an angle grinder or dremel etc or if you think you need some exercise hammer and chisel, after that there pretty much rendered useless

 

Ryan

 

 

if your clever like me,theres a simpler way and the bolts can be re-used

 

drill a small hole through the centre of the sheer bolt approx 3mm tap a torx bit used for a screwdriver or cordless drill with a hammer turn with scredriver or grips and hey presto out comes sheer bolt re-use the same way HTH

if your clever like me,theres a simpler way and the bolts can be re-used

 

drill a small hole through the centre of the sheer bolt approx 3mm tap a torx bit used for a screwdriver or cordless drill with a hammer turn with scredriver or grips and hey presto out comes sheer bolt re-use the same way HTH

if i remember correctly you can't get a drill to the bolt due to the tight space

if i remember correctly you can't get a drill to the bolt due to the tight space

 

 

flexible drive-shaft :p

so if i changed the locks from one car to another i would have to have two keys? one for the doors and one for the ignition? how stupid is that

Park it up in Liverpool for 20 mins, soon be off !

:rofl: :D

so if i changed the locks from one car to another i would have to have two keys? one for the doors and one for the ignition? how stupid is that

 

I have 2 keys, one proper 300ZX one for the ignition, doesn't work on anything else, the other one is a nissan one, works on the drivers door and nothing else, nice!

so if i changed the locks from one car to another i would have to have two keys? one for the doors and one for the ignition? how stupid is that

 

 

unless you remove barrels from doors and get them re-keyed to new ignition key,i have a nissan wafer keying kit,being a locksmith ;)

unless you remove barrels from doors and get them re-keyed to new ignition key,i have a nissan wafer keying kit,being a locksmith ;)

 

 

Youre soooooo clever!

 

 

 

 

 

 

 

 

And pretty too :D