This is in the glove box

What does it all do?

how does it all work?

do I need it?

if not can i sell it

what should the boost control be connected to(electrically)

ooppps pic came out too big!!!!!!!!

the HKS electronic valve control

has a boost level button

3 big buttons and one dial which goes from min to max

the loom behind it was disconnected when i looked

should it be connected to the ECU

 

dont know how to work the turbo timer

no takers

come on somebody must know how to work it

Looks like you have an HKS EVC 1 boost controller. There are two main parts to the system - the controller which you have seen and a control valve unit which should be plumbed into the turbo wastegate actuators.

 

This is what the two main bits looks like:

 

http://www.geocities.co.jp/MotorCity/3594/car_bike/evc.html

 

and here is the HKS manual for the EVC 1:

 

http://www.hksusa.com/info/download.asp?id=1739

 

This is an old model from HKS.

 

-Andrew

Thank you :bow:

should this be connected to that?

should this be connected to that?

 

 

Any chance you can make the picture bigger. Can't quite make it out.

there you go

just trying to get the thing to work

yes it should. The EVC will allow you to increase pressure (boost). Depending on how you have it set up it will probably take readings from the vacuum pipes.

ummm...... interesting. It certainly looks like a boost solenoid although perhaps a little on the small side. However, it looks nothing like mine and I also have an EVC I. Attatched is a picture of the boost solenoid under my bonnet.

 

The link below that Andrew posted gives instructions on what pipe goes where.

http://www.hksusa.com/info/download.asp?id=1739

 

As for the wires that come out of the head unit in your glove box, they chould connect to a wiring loom coming from the boost control solenoid under the bonnet.

 

 

Jon

yes i have one of those mounted next to the air filter

 

did a ECU check

got code 34

i think thats a big job!!!!!