Hey all,

My name is Dimitry from Southampton, and I thought I'd spend a minute to finally introduce myself.

I've had quite a selection of cars over the years and this is currently my 3rd Z32 (I had 3x 350z and even a 260z RHD! ? ). She is a 1993 TT JDM Import Manual LWB Targa top...

Had the car for 4 years but sadly at the start of the ownership I also had a rx7 and a 600bhp Supra so 300 was almost unused. I finally had a huge service done to it and it's back on the road, hoping to resolve further minor issues and use it a lot more through 2021 as I've sold the others now and need a nice daily ?

I'm a Project Engineer in the medical industry by trade but cars are a big passion, so is 3D printing (looking forward to 3d print custom parts for the ZX!!)

Cable on the way from Australia and ConZult free version downloaded for now, but thinking to upgrade to a full version just so I have all the functionality to make sure the car is running sweet.

I won't go in to detail about the car here as even the recent work would be a page long ? 

Hope to see you around!

 

p.s- Add me on Instagram if you use it?!?! IndividualMotors

Hi Dimitry welcome to the club.

I also had an Rx7 some years back, great car.

where did you get the major service done as there aren’t that many that know their way around a Z?

good to see two new members to the club in 24 hours.

Are you planning on using the Z as a daily? 
 

Art

 

 

Welcome to the club! If you need anything please just ask. As you are in the south, I plan a monthly get together in the sunnier months and we have a couple of shows, would be great to see you there!

Welcome to the 300zx owners club Dimitry and the second new member with a bodykitted Z tonight. Hope to hear more about your Z and any parts you 3D print for it. 

1 hour ago, arthur said:

Hi Dimitry welcome to the club.

I also had an Rx7 some years back, great car.

where did you get the major service done as there aren’t that many that know their way around a Z?

good to see two new members to the club in 24 hours.

Are you planning on using the Z as a daily? 
 

Art

 

 

Hey Arthur,

Rectors Way Garage in Weston-Super-Mare. I will write a post about it separately as Mat has restored the 3rd car for me now ? He previously worked on my crx and rx7 and was the only one in the country that could make the twin turbo work on the rx7 instead of suggesting to go single like most specialists do. (He not only made it work, all solenoids were relocated to a easy to reach rail+ everything was uprated and renewed). He's done all the main work for me now, and I will take care of all the small niggles- which I'm starting on today :>>>

I used to have a variety of cars and rx7 was my daily at one point, there is always an audi a3 tdi lurking when I need 65mpg or very dirty jobs, otherwise I do hope 300 will be a nice daily ?

1 hour ago, TheRealNips said:

Welcome to the club! If you need anything please just ask. As you are in the south, I plan a monthly get together in the sunnier months and we have a couple of shows, would be great to see you there!

Thanks man! I already got the boot struts from you but might need a few small extra bits, and I'm definitely up for shows in the upcoming months! ?

23 minutes ago, Gaz 300 said:

Welcome to the 300zx owners club Dimitry and the second new member with a bodykitted Z tonight. Hope to hear more about your Z and any parts you 3D print for it. 

Hey Gaz! Thank you

Just a quick 'part list'
-AP Racing front brakes
-Tein suspension
-HICAS delete
-Stillen bumper (That might go in the future to be replaced with facelift?!?!)
-Wierd bonnet grill (coming off today to be replaced with OEM)
-Custom bonnet
-WingsWest side skirts
-Big ol spoiler
-Stock interior  (Just got a refurbished steering wheel from one of the members here)
-Nismo 615cc injectors with the fancy rail
-Z1 intake pipes
-Powdercoated intake manifold
-New style PTU
-Chipped ECU (Looking forward for Conzult to make sure I'm happy with the chip)
 

Welcome to the Club Dimitry and thank you for your support! Looking forward to seeing your car in the metal. If you don't

already have the information I can lookup the factory build date and original specification if you PM me the VIN.

PM the details in the link below Dimitry and I can send you a Membership Pack.

 

 

10 hours ago, AndrewG said:

Welcome to the Club Dimitry and thank you for your support! Looking forward to seeing your car in the metal. If you don't

already have the information I can lookup the factory build date and original specification if you PM me the VIN.

Hey Andrew, PM sent ?

10 hours ago, Gaz 300 said:

PM the details in the link below Dimitry and I can send you a Membership Pack.

 

 

Hey Gaz, PM sent ?


Thank you for the warm welcome! Impressed to see a forum so active (Just in time as I limited FB use to 5min a day :D)

Spent the whole day today to get her clean again. I did a professional 1to1 course with AutoBriteDirect 6 years ago so know my way around a polishing machine and trying to bring back the black mirror effect (only managed to do a 2 stage for the front but not pictured as it got dark. considering potentially spending some serious time polishing+ waxing before I start using it ?) . Feel free to ask if you need any suggestions in this field ?


Guess I need to start a separate build thread soon, want to get the bodywork back to my standard and take some good pics first though 
 

Hi Dimitry, that is a mean looking Z!

Perhaps a random question, but is the bonnet vented? If so, how do you keep the rain/ water from going all over the engine?

Hi and welcome to the club Dimitry - and that's a nice selection of Japanese supercars you have there sir?

On 07/02/2021 at 00:19, mister_fcx said:

Hi Dimitry, that is a mean looking Z!

Perhaps a random question, but is the bonnet vented? If so, how do you keep the rain/ water from going all over the engine?

Hey,

Thanks! ? it is, and the vent comes out right by the fan area so doesn't leak in to anything important.

On 07/02/2021 at 16:10, RichardS said:

Hi and welcome to the club Dimitry - and that's a nice selection of Japanese supercars you have there sir?

Thank you Richard ?

Think I can now move from introduction topic to build thread, initial work done and she is ready to hit the streets agian! 

On 06/02/2021 at 21:31, Nero_slk said:

Hey Andrew, PM sent ?

Hey Gaz, PM sent ?


Thank you for the warm welcome! Impressed to see a forum so active (Just in time as I limited FB use to 5min a day :D)

Spent the whole day today to get her clean again. I did a professional 1to1 course with AutoBriteDirect 6 years ago so know my way around a polishing machine and trying to bring back the black mirror effect (only managed to do a 2 stage for the front but not pictured as it got dark. considering potentially spending some serious time polishing+ waxing before I start using it ?) . Feel free to ask if you need any suggestions in this field ?


Guess I need to start a separate build thread soon, want to get the bodywork back to my standard and take some good pics first though 
 

Nice SVX, very rare over here!