okay , my TT rear subframe and hicas was swapped out for an NA one,

The hydraulics removed in the engine bay, just the grey connector left now as can be seen from the picky.

 

I noticed my hicas light was perm on,

 

Pc two shows the main ECU on top and the Hicas ECU beneath.

 

I was advised to remove the connector to the right to resolve the hicas light , this worked , however my Cruise no longer functions,

 

so , Is there just one wire I should cut on the second plug to turn the hicas light off but to leave my cc systems working . if so which one,?

 

Or should I loop the grey connector shown in the engine bay to cheat the system, again if so which wires should I connect to each other

 

Any thoughts drop me a line using 07929 159828 or message on here

 

Many thankshttp://s1048.photobucket.com/user/sayersneil/library/?view=recent

Vodkashots showed me this once -

 

It's the ECU wiring colour codes -

 

 

[ATTACH=CONFIG]70012[/ATTACH]

 

Might help..

Edited July 20, 201312 yr by MasterCookieman

Why not just remove the hicas bulb.....simples.

 

Jeff

because If the fault is there it will be stopping my cruise control from engaging . or is that another issue

bump

bump

is this any help...

 

http://www.300zx.co.uk/cgi-bin/manual.cgi?list=st&dir=&config=&refresh=&direction=forward&scale=0&cycle=off&slide=67&design=default&total=98

 

and

 

http://www.300zx.co.uk/cgi-bin/manual.cgi?list=st&dir=&config=&refresh=&direction=forward&scale=0&cycle=off&slide=68&design=default&total=98