Does anyone know what tools I need to buy to get to the dam plugs? And wîth enough angle.

 

If you have a link to somewhere like halfrauds that would be perfect so I could go and get them

there is no funny tool for this job just long extension that's all

Don't you need something with a decent angle and stuff?

I just use a half inch ratchet and a long extension bar, job done. be carefull not to over do it when refitting, the heads are ali.

Ill have to pop to gal fords and spend some money lol

Would this do?

 

http://www.halfords.com/webapp/wcs/stores/servlet/ProductMobileDisplay?catalogId=10151&storeId=10001&productId=167650&categoryId=255216&langId=-1

It sure will:thumbup1:

Great.been and got it so will have a go tomorrow all being well

Make sure when u put the plugs back in u start them by hand, get a few turns before using ratchet.

They should thread all the way in by hand then use a ratchet to fully tighten them.

 

Seen so many people put plugs in and cross thread them, especially when there deep.

 

10mm spark plug socket and an extension bar, u will want a 12mm and 10mm socket too.

Make sure when u put the plugs back in u start them by hand, get a few turns before using ratchet.

They should thread all the way in by hand then use a ratchet to fully tighten them.

 

Seen so many people put plugs in and cross thread them, especially when there deep.

 

10mm spark plug socket and an extension bar, u will want a 12mm and 10mm socket too.

 

indeed..:yes:

Make sure when u put the plugs back in u start them by hand, get a few turns before using ratchet.

They should thread all the way in by hand then use a ratchet to fully tighten them.

 

Seen so many people put plugs in and cross thread them, especially when there deep.

 

10mm spark plug socket and an extension bar, u will want a 12mm and 10mm socket too.

 

 

Oh crap must read u allready bought what u need lol...Sorry...

 

- - - Updated - - -

 

Make sure when u put the plugs back in u start them by hand, get a few turns before using ratchet.

They should thread all the way in by hand then use a ratchet to fully tighten them.

 

Seen so many people put plugs in and cross thread them, especially when there deep.

 

10mm spark plug socket and an extension bar, u will want a 12mm and 10mm socket too.

 

 

Oh crap must read u allready bought what u need lol...Sorry...

It's still good advice though :thumbup1:

Are the 10 and 12 sockets for the Coilpacks and balance bar?

Are the 10 and 12 sockets for the Coilpacks and balance bar?

 

Yeah mate, sure are...