There aren’t any available on the market so you’ll have to go down the custom route. Not sure if you’ve come across automotive YouTube channels but the Autoalex group of channels all use this firm called Richs Fabrication Shop in Garford, Oxfordshire. They’ve done a few valved exhausts on their cars from Merc CL600’s to Landcruisers I seem to remember. The welding appears top notch, the valve was operated by a Bluetooth fob on the keychain so really convenient. Could probably get it mounted in the interior if easier.
Link to their IG: https://www.instagram.com/richs_fabrication_shop/
By
Raja93 ·
Hi everyone, long time no "see" ( been working on my bike)
Drove to Antwerp last weekend, only about 160 km from here. Didn´t thrash the car or anything as it´s a 120km limit there.
when I started the car the next morning the cold idle was about 2000 rmp, dropping to around 1500 rpm when warm.
I´ve:
1: disconnected the ECU for a while to no avail,
2: done an ECU diagnostic with a 55 result ( No errors)
3: Checked MAF and air filters
4: checked the ECU water temp sensor
5: disconnected the AAV and turned the base idle down, which brought the revs down to 1600rpm when cold and 1050 when warm.
Throttle bodies were cleaned about 8 months ago, injectors are sound and the connectors new.
The idle isn´t erratic or anything, just high, feels like the choke is permanently on.
as always, any ideas greatly appreciated.
Maz