Next issue is for the left bank, as the instructions and pipe work are designed for the USA market
and such do not take into account the stock oil pressure sensor.
I know need to work out how to adapt the pipe from the two different threads.
below is part of the stock oil line that feeds the turbos, on the right is the new hose i need to adapt to.
I had an idea to use this connection but the oil feed bolts thread is too long so it will never tighten.
By
JaiKai ·
3:o5am anti-clockwise between m3 and a3.
looked like deep dish wheels and i think 99 spec spoiler. rear lights were different as well.
think reg ended LND, was hard to tell as they rain and spray was so bad.