November 16, 201114 yr Does have one, how does it work ? and How I can connect program to change setting of wheels dimensions and something more?
November 16, 201114 yr It works by constantly checking the ABS signals for wheel slip, when this happens it cuts the injectors for a cycle. I've installed it but not had a chabce to get the car out and test it. If you have the manual one then you need to connect the rs232 connector from that to you laptop and install the software on that. Once done fire up the program and change the wheel size there. If like me you have the digital controller then it should be plugged into the rs232 lead that the controller is plugged into. Plug laptop into this. Wheels can be set by software or iirc you can do it via the digi controller. HTH. Edited November 16, 201114 yr by Steams
November 17, 201114 yr It works by constantly checking the ABS signals for wheel slip, when this happens it cuts the injectors for a cycle. I've installed it but not had a chabce to get the car out and test it. If you have the manual one then you need to connect the rs232 connector from that to you laptop and install the software on that. Once done fire up the program and change the wheel size there. If like me you have the digital controller then it should be plugged into the rs232 lead that the controller is plugged into. Plug laptop into this. Wheels can be set by software or iirc you can do it via the digi controller. HTH. well cheers for all info I knew it some of those things but dont have a race logic software and no wire( connection ) as well. Where I can get one ? I have on my car before and I dint feel any big deifferance is was like a that controller just simple cuts your ignition off than I press too much gas but does that all ?
November 17, 201114 yr Give Racelogic a ring, they're really helpful and will tell you what you need.
November 24, 201114 yr I will try to give them a ring. But anyway does Anyone got racelogic tructio control and is using. I just want to know is that really good stuff or not. I know that i can set lunch control, rev limiter, injectors work and many more. Does this rev limiter cuts ingnision as a bee rev limiter and spiting a fire?
Does have one, how does it work ? and How I can connect program to change setting of wheels dimensions and something more?