Jump to content
View in the app

A better way to browse. Learn more.

300ZX Owners Club

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Last night got a very heavy waterleak above passenger side turbo and running down side of gearbox when engine is running. Totally inaccessible I cant even see the leak source under the car.

 

I think it needs to be towed to a garage and gearbox dropped to get to. Any Z garages near Surrey / S.London im SM2 area.

 

Thanks

Featured Replies

  • Author
sounds like a pipe under the plenum has given up:sneaky2:

 

Does removing the plenum give any access down the back of the engine ie to hoses

A plenum bypass which does away with using all those crappy little water pipes under the plenum and takes a water feed straight from the metal pipes that feed the matrix at the back of the engine to each turbo can be done with the plenum in place , the battery will need removing and you,ll get a few scrapes but it,s quite a simple job once you get your head round which pipes need to be connected to and from the tubs .

There,s only three you have to do , on the O/S tub the straight metal pipe going to the tub is a feed or return .HTH

IMAG0013-1.jpg

A plenum bypass which does away with using all those crappy little water pipes under the plenum and takes a water feed straight from the metal pipes that feed the matrix at the back of the engine to each turbo can be done with the plenum in place ( engine was in when i first did mine but then replaced with blue silicon later when i had the engine out ) , the battery will need removing and you,ll get a few scrapes but it,s quite a simple job once you get your head round which pipes need to be connected to and from the tubs .

There,s only three you have to do , on the O/S tub the straight metal pipe going to the tub is a feed or return .HTH

IMAG0013-1.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Unfortunately, your content contains terms that we do not allow. Please edit your content to remove the highlighted words below.
Reply to this topic...

Recently Browsing 0

  • No registered users viewing this page.

Important Information

Terms of Use

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.