Will this kit plug and play in place of a series 1 ptu

 

Thanks

http://cgi.ebay.com/ebaymotors/OEM-NISSAN-300ZX-Z32-90-96-PTU-POWER-TRANSISTOR-KIT_W0QQcmdZViewItemQQ_trksidZp3286Q2em63Q2el1177QQhashZitem53dc1cc1d9QQitemZ360175157721QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

 

Hahaha forgot to add the link

In short....... Yep!!

 

and only £121.92 delivered!!

so i take it i should snap it up quick as i have a code 21, thanks

Don't forget to add import duty and VAT on top of that price.

Don't forget to add import duty and VAT on top of that price.

 

You might be OK and avoid paying anything, as he uses USPS, and I've never had to pay anything with that service yet ;)........ but you never know!

fingers crossed!!!

is it easy to wire one in if you have the connectors, i mean are the wires all the same colour?

is it easy to wire one in if you have the connectors, i mean are the wires all the same colour?

 

You have two choices........

 

1) Use the adaptor loom that comes with the kit and plug into your original loom.

 

2) Use this link...... http://www.300zx.co.uk/forums/showthread.php?t=128599... and adapt your current loom to just use the new series 2 plugs only. A bit more work, but less likely to be affected by bad connectors as you are doing away with the old plugs altogether.

 

HTH

Dave

You won't need to worry about wiring anything in because the kit comes complete with a harness. This plugs directly into your existing wiring loom.

 

Also, USPS most definitely gets intercepted by Customs & Excise. I've just had to pay import duty/vat & agency handling fees on a consignment from the US that came via USPS (by the way, ParcelForce are the UK handling agents).

 

You should therefore budget to pay in the region of 24% of the TOTAL SHIPPED COST for import duty/vat/handling. You may get lucky but from experience I'd say it will be charged.

 

Regards,

 

Dan

no problem, thanks. Only reason i ask if its easy to wire in there is a used one with both connectors for a fraction of the price, i do electrics at work so i dont mind a little extra work. So thanks Dave, you saved me some spon

You have two choices........

 

1) Use the adaptor loom that comes with the kit and plug into your original loom.

 

2) Use this link...... http://www.300zx.co.uk/forums/showthread.php?t=128599... and adapt your current loom to just use the new series 2 plugs only. A bit more work, but less likely to be affected by bad connectors as you are doing away with the old plugs altogether.

 

HTH

Dave

 

Just wanted to say thanks for all your help, S2 PTU fitted with no problems:dance:

Just wanted to say thanks for all your help, S2 PTU fitted with no problems:dance:

 

Always happy to help, which method did you go for in the end/