So i fitted the coilovers and its alot lower.

 

Before:

 

After:

nice one, now just drive and wait for more parts to go wrong as they did on mine lol, looks much better, what type of coilovers did ya fit

nice one, now just drive and wait for more parts to go wrong as they did on mine lol, looks much better, what type of coilovers did ya fit

 

D2 Sports mate

So i fitted the coilovers and its alot lower.

 

Before:

 

 

 

After:

 

 

 

 

Look's great Murt :bow:, nice one ! can really see the drop in these 2 pic's

Edited May 31, 200916 yr by ck300z

LINGLONG.... weehhaaaaaay

how are they on the road, ive heard they are quite stiff, looks good though

how are they on the road, ive heard they are quite stiff, looks good though

 

Road use so far is fine mate, ive put it on as soft as it can go, but good god, speed bumps are another matter.... 0.00002mph over them

you can choosd which spring rates to use with the d2's.

They come with pillow mounts and are a monotube system along with hieght and spring preload settings which is what im after next.

Jeezus mate thats low and they will need to settle yet so it will get lower. Hope ya shocks are hard or you will end up with a wheel in your boot :D

 

I would get your alignment checked when youve finished fookin about with ya ride height tho :)

 

Looks great tho :duffer:

you can choosd which spring rates to use with the d2's.

They come with pillow mounts and are a monotube system along with hieght and spring preload settings which is what im after next.

 

I know the engine bay needs a clean....

 

Jeezus mate thats low and they will need to settle yet so it will get lower. Hope ya shocks are hard or you will end up with a wheel in your boot :D

 

I would get your alignment checked when youve finished fookin about with ya ride height tho :)

 

Looks great tho :duffer:

 

Mate they do not drop anymore, they are extremely stiff, when you jack the car up the wheel goes up with it, it doesnt flex if you know what i mean :x:

That looks great, just how I want mine to eventually sit.

 

Its a good point that has been raised about getting the alignment sorted out, do it ASAP as I fitted some coilovers to my old corrado, and my NEW front tyres went through to the cords on the inner edges in FOUR DAYS...

 

What you need now is some wheel spacers and it'll look ace... ;)

they still look new murtle ;) nice one, how much they set ya back?

 

tracking would be a good idea once u have the adjustable camber arms.

they still look new murtle ;) nice one, how much they set ya back?

 

tracking would be a good idea once u have the adjustable camber arms.

 

would also like to know the cost as i am very interested in getting some as i need some coilovers

would also like to know the cost as i am very interested in getting some as i need some coilovers

 

probably around 750 new, murt bought his second hand, lucky bugger.

you can adjust the height on my flymo as well. that also ends up covered in grass ;)

That looks great, just how I want mine to eventually sit.

 

Its a good point that has been raised about getting the alignment sorted out, do it ASAP as I fitted some coilovers to my old corrado, and my NEW front tyres went through to the cords on the inner edges in FOUR DAYS...

 

What you need now is some wheel spacers and it'll look ace... ;)

 

I will very soon mate.

 

they still look new murtle ;) nice one, how much they set ya back?

 

tracking would be a good idea once u have the adjustable camber arms.

 

Yep will do soon, £300 they were, i still owe have to pay him yet XD

probably around 750 new, murt bought his second hand, lucky bugger.

 

Think they are around that, i think simon who i brought them for paid £1100

 

you can adjust the height on my flymo as well. that also ends up covered in grass ;)

 

Ahahahaha good times! Only problem was i only found out later that it completely broke my exhaust off! :shock:

Linglong tyres on a twinturbo 300, are you for real?

Linglong tyres on a twinturbo 300, are you for real?

 

They are temp.... Waiting for new alloys and tyres....

im going to get coilovers this week. can they go lower???

 

 

Car looks great now :)

im going to get coilovers this week. can they go lower???

 

 

Car looks great now :)

 

Have a look at the HSD's on driftworks. They are supposedly real good value for money if you can't run to Teins

im going to get coilovers this week. can they go lower???

 

 

Car looks great now :)

 

Yes mate i could drop it so low it would be on the floor!

Yes mate i could drop it so low it would be on the floor!

 

excelent just what i want :nana2:

teins have a good name and reputation mainly because they are a resonable price, they are still at the lower of the market for performance. The driftworks line are new and have alot less reputation so they are alot cheaper than rivals.

You could purchase something as good as endless zeal and spend 4k etc etc.

 

I however will be buying hsd/driftworks next as they are in my price range :D Ive also heard good things and watched cars with this setup perform well. Ideally i need a coilover with hieght adjustment and spring preload separate, not what i currently have which adjusts preload and height together... not so good.

Linglong tyres on a twinturbo 300, are you for real?

 

i have linglong on the back, makes life more exciting, they are hilarious in the wet, have to drive really careful.

 

shocks look ace murt, car looks lovely mate

Have a look at the HSD's on driftworks. They are supposedly real good value for money if you can't run to Teins

 

HSD = Better than the Tein superstreets and the Tein Flex and Cheaper. :) I would also take them over the new Tein Mono Flex,

 

HSD are also the same shocks sold by Powertrix and SPL, and have a fair bit of proven track performance experience. More than any other on a 300zx.

i have linglong on the back, makes life more exciting, they are hilarious in the wet, have to drive really careful.

 

shocks look ace murt, car looks lovely mate

 

Thanks, (I also got the budgets for a bit of fun LOL! But castle combe was extremely close!)